Contacts are missing when I click To, Cc or Bcc buttons

M

markh

I just used Easy Transfer to move my Outlook 2003 files to Vista Home -
Outlook 2007. In the Contacts view, all are there.

I attempted the resolution steps in Outlook Help to configure the Contacts
folder Show this folder... was not enabled and to Reset Outlook Address Book
settings, but in Show this addess list first, my Contacts were not listed.
 
M

MichaelJanz

markh said:
I just used Easy Transfer to move my Outlook 2003 files to Vista Home -
Outlook 2007. In the Contacts view, all are there.

I attempted the resolution steps in Outlook Help to configure the Contacts
folder Show this folder... was not enabled and to Reset Outlook Address Book
settings, but in Show this addess list first, my Contacts were not listed.

There's two likely solutions ... firstly right click on Contacts in your
folder list and choose Properties ... Click on Outlook Address Book ...Ensure
Show this folder as email address book is checked.

If this doesn't solve the problem, go to Tools, Account Settings and click on
the Address Books Tab ... Choose New ... Check Additional Address Books then
Contacts etc etc ..

Cheers

--
Michael Janz

Director of Training & Marketing
Priority Management
Breaking Productivity Barriers
http://www.prioritymanagement.com.au
 
M

Milly Staples [MVP - Outlook]

Actually, it is well documented that use the WET will invariably corrupt
your Outlook profile.

Create a new one under Control Panel->Mail Icon->PRofiles->New. Do not copy
the old corrupt one - and configure it to use your correct .pst file.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact.
ALWAYS post your Outlook version.
How to ask a question: http://support.microsoft.com/KB/555375


After furious head scratching, MichaelJanz asked:

| markh wrote:
|| I just used Easy Transfer to move my Outlook 2003 files to Vista
|| Home - Outlook 2007. In the Contacts view, all are there.
||
|| I attempted the resolution steps in Outlook Help to configure the
|| Contacts folder Show this folder... was not enabled and to Reset
|| Outlook Address Book settings, but in Show this addess list first,
|| my Contacts were not listed.
|
| There's two likely solutions ... firstly right click on Contacts in
| your folder list and choose Properties ... Click on Outlook Address
| Book ...Ensure Show this folder as email address book is checked.
|
| If this doesn't solve the problem, go to Tools, Account Settings and
| click on the Address Books Tab ... Choose New ... Check Additional
| Address Books then Contacts etc etc ..
|
| Cheers
 
M

markh

I created a new profile and the results were the same.
All my data transferred and is viewable in Mail-Calendar-Contacts. I added a
"test" contact to one of the Contact folders and it transferred over to my
iTouch at the next sync. Everything works like it should, except in creating
a new mail when I click "To" and a blank address window opens up.
What gives the To-Cc_Bcc buttons direction on where to go for
contact/address data?
When I set up Outlook, could I have indicated that I use an exchange
server(?) and it scewed things up. But, then again, everything else works
great.
 
M

MichaelJanz via OfficeKB.com

markh said:
I created a new profile and the results were the same.
All my data transferred and is viewable in Mail-Calendar-Contacts. I added a
"test" contact to one of the Contact folders and it transferred over to my
iTouch at the next sync. Everything works like it should, except in creating
a new mail when I click "To" and a blank address window opens up.
What gives the To-Cc_Bcc buttons direction on where to go for
contact/address data?
When I set up Outlook, could I have indicated that I use an exchange
server(?) and it scewed things up. But, then again, everything else works
great.
Actually, it is well documented that use the WET will invariably corrupt
your Outlook profile.
[quoted text clipped - 19 lines]

Did you check my earlier post:
There's two likely solutions ... firstly right click on Contacts in your
folder list and choose Properties ... Click on Outlook Address Book ...Ensure
Show this folder as email address book is checked.

If this doesn't solve the problem, go to Tools, Account Settings and click on
the Address Books Tab ... Choose New ... Check Additional Address Books then
Contacts etc etc ..

Cheers

--
Michael Janz

Director of Training & Marketing
Priority Management
Breaking Productivity Barriers
http://www.prioritymanagement.com.au

Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.aspx/ms-outlook/200812/1
 
M

markh

I did attempt both of those suggested fixes previously (forgot to include in
previous reply), as I had found them in Outlook Help. "Show this folder;;;"
was disabled/greyed out.
In Outlook Address Book settings, when I click New, there are two listings.
Mobile Addr book and Outlook Addr book. As a result, when I click on Outlook
Address book, a message infoems me that This account already exists and
cannot be specified twice.

--
markh


MichaelJanz via OfficeKB.com said:
markh said:
I created a new profile and the results were the same.
All my data transferred and is viewable in Mail-Calendar-Contacts. I added a
"test" contact to one of the Contact folders and it transferred over to my
iTouch at the next sync. Everything works like it should, except in creating
a new mail when I click "To" and a blank address window opens up.
What gives the To-Cc_Bcc buttons direction on where to go for
contact/address data?
When I set up Outlook, could I have indicated that I use an exchange
server(?) and it scewed things up. But, then again, everything else works
great.
Actually, it is well documented that use the WET will invariably corrupt
your Outlook profile.
[quoted text clipped - 19 lines]

Did you check my earlier post:
There's two likely solutions ... firstly right click on Contacts in your
folder list and choose Properties ... Click on Outlook Address Book ...Ensure
Show this folder as email address book is checked.

If this doesn't solve the problem, go to Tools, Account Settings and click on
the Address Books Tab ... Choose New ... Check Additional Address Books then
Contacts etc etc ..

Cheers

--
Michael Janz

Director of Training & Marketing
Priority Management
Breaking Productivity Barriers
http://www.prioritymanagement.com.au

Message posted via OfficeKB.com
http://www.officekb.com/Uwe/Forums.aspx/ms-outlook/200812/1
 
B

Brian Tillman [MVP - Outlook]

I did attempt both of those suggested fixes previously (forgot to include
in
previous reply), as I had found them in Outlook Help. "Show this
folder;;;"
was disabled/greyed out.

Then your mail profile is still corrupt, possibly from not having created it
correctly. Describe exactly the steps you used.
 
M

markh

I created a new profile by using the follwoing steps starting in vista home.
start
control panel additonal options
32-bit control panel
mail - mail setup-outlook
show profiles
add
add new em account
- the following inputs were exactly like my original account and were keyed
in - not copy/paste.
em address
password - twice
- searching for mjh....@.... settings
configuring em server settings.
- it could not establish an encrypted connection so I clicked Next to have
it search for an unencrypted server - which it found

In Account Settings/Data Files - i confirmed the default was Outlok2.pst in
c:\users\mark\appdata\local\micrsoft
outlook

Always use this profile (the new one).

reboot - same result.

I created another new profile just now to ensure I documented the process
your name. My previous attempt created the data file Outlook1. Both Outlook
1 & 2 are 265K in size and my original file that was east transferred over
from an Outlook 2003 PC is at 926,545K(?).

I appreciate the help. I called dell software support this morning and they
(India) told me that Outlook 2009 Small Business requires a server to store
and access Contact dtata. I found that very hard to believe. Do you know if
it is true?
 
M

markh

I forgot to add this question in my previous reply -
Because my PC came pre-loadd with Office 2007 Small Business with Outlook
2007 Small Business and I have no need for the Small Business function, can
or should I uninstall the following programs?
-Business Contact Manager for Outlook 2007
-MS Office Small Business Connectivity Components
-MS SQL Server 2005
-MS Server Native Client
-MS SQL Server Setup Support Files
-MS SQL Server VSS Writer
 
B

Brian Tillman [MVP - Outlook]

I forgot to add this question in my previous reply -
Because my PC came pre-loadd with Office 2007 Small Business with Outlook
2007 Small Business and I have no need for the Small Business function,
can
or should I uninstall the following programs?
-Business Contact Manager for Outlook 2007
-MS Office Small Business Connectivity Components
-MS SQL Server 2005
-MS Server Native Client
-MS SQL Server Setup Support Files
-MS SQL Server VSS Writer

I would. I prefer not having apps I don't need on my PC.
 
M

markh

I removed all of the Outlook business contact/management programs mentioned
in my previous reply and created another new profile and then some of the
Contact data appeared when I clicked on "To".

I then found that I could go to each of my individual Contact folders -
- properties
- Outllook Address Book tab
and enable - Show this folder as an e-mail address book.

There might be a better/cleaner way of making that happen, but it worked and
I have visibility and use of all the data that I hade on my old PC.

My thanks again to all.
 
I

Igor

MichaelJanz said:
There's two likely solutions ... firstly right click on Contacts in your
folder list and choose Properties ... Click on Outlook Address Book ...Ensure
Show this folder as email address book is checked.

If this doesn't solve the problem, go to Tools, Account Settings and click on
the Address Books Tab ... Choose New ... Check Additional Address Books then
Contacts etc etc ..

Cheers

--
Michael Janz

Director of Training & Marketing
Priority Management
Breaking Productivity Barriers
http://www.prioritymanagement.com.au
 
I

Igor

Hi, Mike
You did not read question that says "I attempted the resolution steps in
Outlook Help to configure the Contacts
folder Show this folder... was not enabled and to Reset Outlook Address Book
settings, but in Show this addess list first, my Contacts were not listed. "

so you answer is wrong by default
 
I

Igor

Anyway, to continue - problem is still there:
-Sony laptop used to have Windows XP and Outlook 2007 which were backed up
and Windows Vista Pro was installed which included trial Outlook 2007 with
evaluation version of that "Business Manager whatever".
- Trial Outlook 2007 with "Business Manager .." was uninstalled and latest
MS Office with normal Outlook 2007 was installed instead. Unfortunately, SQL
Server component of old installation could not be deleted completely as it is
required by some Sony program, but BUS.. instance of server was deleted.
- PST files were restored from XP backup and worked well except this weirdo
empty contacts when 'To' is pressed (Contacts per se are fine).
- MS help suggested solutions did not help:
- suggested check box in "show this folder as an email address book" is
greyed out
- suggested entry in "Show this address list first" dropdown would not
contain Contacts entry it is supposed to contain
- creation of new mail Outlook profile and setting it as default does
not change anything
Thanks,
Igor
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top