Problem with the CIW (Custom Installation Wizard).

B

Bob Buckland ?:-\)

Hi Kor,

The preferred method for Office 2000 is to apply
the Administrative update to the Office installation
point before deploying or redeploying as Susan mentioned.

For Office 2000 there was a problem with the original
Setup.exe when it came to chaining programs.
http://support.microsoft.com/kb/235598
There is an 'enhanced' setup program that can be downloaded
http://microsoft.com/office/orkarchive/2000ddl.htm#setupchn
that handles some of the issues.

=========
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished.>>
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

The preferred method for Office 2000 is to apply
the Administrative update to the Office installation
point before deploying or redeploying as Susan mentioned.

For Office 2000 there was a problem with the original
Setup.exe when it came to chaining programs.
http://support.microsoft.com/kb/235598
There is an 'enhanced' setup program that can be downloaded
http://microsoft.com/office/orkarchive/2000ddl.htm#setupchn
that handles some of the issues.

=========
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished.>>
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

The preferred method for Office 2000 is to apply
the Administrative update to the Office installation
point before deploying or redeploying as Susan mentioned.

For Office 2000 there was a problem with the original
Setup.exe when it came to chaining programs.
http://support.microsoft.com/kb/235598
There is an 'enhanced' setup program that can be downloaded
http://microsoft.com/office/orkarchive/2000ddl.htm#setupchn
that handles some of the issues.

=========
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished.>>
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

The preferred method for Office 2000 is to apply
the Administrative update to the Office installation
point before deploying or redeploying as Susan mentioned.

For Office 2000 there was a problem with the original
Setup.exe when it came to chaining programs.
http://support.microsoft.com/kb/235598
There is an 'enhanced' setup program that can be downloaded
http://microsoft.com/office/orkarchive/2000ddl.htm#setupchn
that handles some of the issues.

=========
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished.>>
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

The preferred method for Office 2000 is to apply
the Administrative update to the Office installation
point before deploying or redeploying as Susan mentioned.

For Office 2000 there was a problem with the original
Setup.exe when it came to chaining programs.
http://support.microsoft.com/kb/235598
There is an 'enhanced' setup program that can be downloaded
http://microsoft.com/office/orkarchive/2000ddl.htm#setupchn
that handles some of the issues.

=========
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished.>>
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

The preferred method for Office 2000 is to apply
the Administrative update to the Office installation
point before deploying or redeploying as Susan mentioned.

For Office 2000 there was a problem with the original
Setup.exe when it came to chaining programs.
http://support.microsoft.com/kb/235598
There is an 'enhanced' setup program that can be downloaded
http://microsoft.com/office/orkarchive/2000ddl.htm#setupchn
that handles some of the issues.

=========
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished.>>
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

The preferred method for Office 2000 is to apply
the Administrative update to the Office installation
point before deploying or redeploying as Susan mentioned.

For Office 2000 there was a problem with the original
Setup.exe when it came to chaining programs.
http://support.microsoft.com/kb/235598
There is an 'enhanced' setup program that can be downloaded
http://microsoft.com/office/orkarchive/2000ddl.htm#setupchn
that handles some of the issues.

=========
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished.>>
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

The preferred method for Office 2000 is to apply
the Administrative update to the Office installation
point before deploying or redeploying as Susan mentioned.

For Office 2000 there was a problem with the original
Setup.exe when it came to chaining programs.
http://support.microsoft.com/kb/235598
There is an 'enhanced' setup program that can be downloaded
http://microsoft.com/office/orkarchive/2000ddl.htm#setupchn
that handles some of the issues.

=========
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished.>>
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

For chaining to work in Office 2000 be sure you have
the updated Setup program for Office 2000.
http://support.microsoft.com/default.aspx?scid=kb;en-us;232501&FR=1

but for installing a Service Pack for Office 2000 you may
want to update the Office Admin point first with that update
then install the updated version of the Admin Point rather
than doing two installs.

======
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished. ??
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

For chaining to work in Office 2000 be sure you have
the updated Setup program for Office 2000.
http://support.microsoft.com/default.aspx?scid=kb;en-us;232501&FR=1

but for installing a Service Pack for Office 2000 you may
want to update the Office Admin point first with that update
then install the updated version of the Admin Point rather
than doing two installs.

======
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished. ??
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

For chaining to work in Office 2000 be sure you have
the updated Setup program for Office 2000.
http://support.microsoft.com/default.aspx?scid=kb;en-us;232501&FR=1

but for installing a Service Pack for Office 2000 you may
want to update the Office Admin point first with that update
then install the updated version of the Admin Point rather
than doing two installs.

======
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished. ??
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

For chaining to work in Office 2000 be sure you have
the updated Setup program for Office 2000.
http://support.microsoft.com/default.aspx?scid=kb;en-us;232501&FR=1

but for installing a Service Pack for Office 2000 you may
want to update the Office Admin point first with that update
then install the updated version of the Admin Point rather
than doing two installs.

======
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished. ??
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

For chaining to work in Office 2000 be sure you have
the updated Setup program for Office 2000.
http://support.microsoft.com/default.aspx?scid=kb;en-us;232501&FR=1

but for installing a Service Pack for Office 2000 you may
want to update the Office Admin point first with that update
then install the updated version of the Admin Point rather
than doing two installs.

======
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished. ??
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

For chaining to work in Office 2000 be sure you have
the updated Setup program for Office 2000.
http://support.microsoft.com/default.aspx?scid=kb;en-us;232501&FR=1

but for installing a Service Pack for Office 2000 you may
want to update the Office Admin point first with that update
then install the updated version of the Admin Point rather
than doing two installs.

======
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished. ??
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

For chaining to work in Office 2000 be sure you have
the updated Setup program for Office 2000.
http://support.microsoft.com/default.aspx?scid=kb;en-us;232501&FR=1

but for installing a Service Pack for Office 2000 you may
want to update the Office Admin point first with that update
then install the updated version of the Admin Point rather
than doing two installs.

======
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished. ??
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

For chaining to work in Office 2000 be sure you have
the updated Setup program for Office 2000.
http://support.microsoft.com/default.aspx?scid=kb;en-us;232501&FR=1

but for installing a Service Pack for Office 2000 you may
want to update the Office Admin point first with that update
then install the updated version of the Admin Point rather
than doing two installs.

======
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished. ??
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 
B

Bob Buckland ?:-\)

Hi Kor,

For chaining to work in Office 2000 be sure you have
the updated Setup program for Office 2000.
http://support.microsoft.com/default.aspx?scid=kb;en-us;232501&FR=1

but for installing a Service Pack for Office 2000 you may
want to update the Office Admin point first with that update
then install the updated version of the Admin Point rather
than doing two installs.

======
Hello,
I'm having problems using the CIW with Office 2000 installs. It works fine
up until step 13 which allows you to pick additional programs to install
after the Office installation is complete. For whatever reason, it never
installs any of the additional programs I have listed, although it does
complete the Office 2k installation. Any ideas would be very helpful. FYI I
want it to run the SP3 for Office 2k after it's finsished. ??
--
Let us know if this helped you,

Bob Buckland ?:)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top