Reverse database engineer will not close

[Ken]

I went to reverse engineer my access 2007 database. I forgot that my local
copy does not have all the table alias set correctly.

Visio returns a error "Your network access was interrupted. To continue,
close the database, and then open it again."

There is only a OK button on the dialog and I can not cancel out. Has this
been reported before?

 

[James Wittrell]

I have not been able to located information on this dialog message. When
the Ok button is pressed does the dialog go away? If not what happens if
you adjust your table alias?

James W.

--------------------
Thread-Topic: Reverse database engineer will not close
thread-index: Acn010eqh/CQ7RwXT1Klmq8QYxFTAA==
X-WBNR-Posting-Host: 208.125.53.170
From: =?Utf-8?B?S2Vu?= <[email protected]>
Subject: Reverse database engineer will not close
Date: Wed, 24 Jun 2009 07:23:01 -0700
Lines: 8
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.3168
Newsgroups: microsoft.public.visio.general
Path: TK2MSFTNGHUB02.phx.gbl
Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.visio.general:12939
NNTP-Posting-Host: tk2msftibfm01.phx.gbl 10.40.244.149
X-Tomcat-NG: microsoft.public.visio.general

I went to reverse engineer my access 2007 database. I forgot that my local
copy does not have all the table alias set correctly.

Visio returns a error "Your network access was interrupted. To continue,
close the database, and then open it again."

There is only a OK button on the dialog and I can not cancel out. Has this
been reported before?

 

[Ken]

James,

The problem is there is only a OK button and there is no cancel button.
Visio is stuck in a loop. I had to use the task manager to kill visio.

When I used the reverse engineer from the computer with the correct paths it
worked just fine. I have a backup on a laptop and forgot to reset the links.

Ken

 

[James Wittrell]

So all you end up seeing is a message dialog with an OK button. I think
this is actually caused by Access from what I can find on it. You already
have a solution however it is interesting you cannot close the dialog and
return to the previous action. The Access error number that matches this
message is 3043.

James W.

--------------------
Thread-Topic: Reverse database engineer will not close
thread-index: Acn07IPfRis2PNOaQnKIUPsgVUZazQ==
X-WBNR-Posting-Host: 208.125.53.170
From: =?Utf-8?B?S2Vu?= <[email protected]>
References: <[email protected]>
<[email protected]>
Subject: RE: Reverse database engineer will not close
Date: Wed, 24 Jun 2009 09:55:01 -0700
Lines: 52
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.3168
Newsgroups: microsoft.public.visio.general
Path: TK2MSFTNGHUB02.phx.gbl
Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.visio.general:12942
NNTP-Posting-Host: tk2msftibfm01.phx.gbl 10.40.244.149
X-Tomcat-NG: microsoft.public.visio.general

James,

The problem is there is only a OK button and there is no cancel button.
Visio is stuck in a loop. I had to use the task manager to kill visio.

When I used the reverse engineer from the computer with the correct paths
it
worked just fine. I have a backup on a laptop and forgot to reset the
links.

Ken

 

[Ken]

Hi James,

Correct, no close or cancel button.

Ken