Slow access speed when connecting to SQL Server from Access Front End

S

Shaleen Chugh

Hi,

I have an MS access Application Front end which used to communicate to
another access database through linked tables.I was given a task to link the
front end to SQL Server and when the whole application was linked to SQL
Server. now the application front end works but very slow on performance
when compared with acess to access version. I am using SQL Server Driver to
connect to SQL Server back end. Pls advise what is the reason that the speed
is so slow.

Thanks,

Shaleen
 
A

Albert D. Kallal

SQL server is indeed a high performance system, and also a system that can
scale to many many users.

If you write your application in c++, or VB or in your case the application
was written in ms-access, in GENERAL the performance of all of these tools
will BE THE SAME.

In other words...sql server is rather nice, and is a standard system used in
the IT industry.

So, you have a robust and secure and scalable data server..but it is
slow....why?

The first problem is likely that the application was not designed to limit
the amount of data that gets transfer from the back end to the front end.

For example, often lazy programmers just open a form attached to a large
table..and then tell the users to "have" at it?


We often see posts here that a application is too slow with one user. If the
application is too slow with one user..then what can one expect when they
try and run 10 users. That is now 10 times the requirements..

The other issue is how well is the database setup?

Further..how well are the forms designed?

How well does the application work with 5 users..and then when you jump to
10 users...how much a slow down to you notice?

A few things:

Having a table with 75k records is quite small. Lets assume you have 12
users. With a just a 100% file base system (jet), then the performance of
that system should really have screamed.

Before Microsoft started "really" selling sql server, they rated JET could
handle easily 50 users. We have credible reports here of people
running 100 users. however, in those cases everything must be
"perfect".

I have some applications out there with 50, or 60 HIGHLY related tables.
With 5 to 10 users on a network, response time is instant. I don't think any
form load takes more then one second. Many of those 60+ tables are highly
relational..and in the 50 to 75k records range.

So, with my 5 users..I see no reason why I can't scale to 15 users with
such small tables in the 75,000 record range.

If the application did not perform with such small tables of only 75k
records..then upsizing to sql server will do absolute nothing to fix
performance issues. In fact, in the sql server newsgroups you see weekly
posts by people who find that upgrading to sql actually slowed things down.
I even seem some very cool numbers showing that some queries where actually
MORE EFFICIENT in terms of network use by JET then sql server.

My point here is that technology will NOT solve performance problems.
However, good designs that make careful use of limited bandwidth resources
is the key here. So, if the application was not written with good
performance in mind..then you kind are stuck with a poor design!

I mean, when using a JET file share, you grab a invoice from the 75k record
table..only the one record is transferred down the network with a file share
(and, sql server will also only transfer one record). So, at this point, you
really will NOT notice any performance difference by upgrading to sql
server. There is no magic here.

Sql server is a robust and more scalable product then is JET. And, security,
backup and host of other reasons make sql server a good choice.
However, sql server
will NOT solve a performance problem with dealing with such small tables as
75k records

Of course, when efforts are made to utilize sql server, then
significant advances in performance can be realized.

I will give a few tips...these apply when using ms-access as a file
share, or even odbc to sql server:

** Ask the user what they need before you load a form!

The above is so simple, but so often I see the above concept ignored.
For example, when you walk up to a instant teller machine, does it
download every account number and THEN ASK YOU what you want to do? In
access, it is downright silly to open up form attached to a table WITHOUT
FIRST asking the user what they want! So, if it is a customer invoice, get
the invoice number, and then load up the form with the ONE record (how can
one record be slow!). When done editing the record...the form is closed, and
you are back to the prompt ready to do battle with the next customer. You
can read up on how this "flow" of a good user interface works here (and this
applies to both JET, or sql server appcltions):

http://www.attcanada.net/~kallal.msn/Search/index.html

My only point here is restrict the form to only the ONE record the user
needs. Of course, sub-forms, and details records don't apply to this rule,
but I am always dismayed how often a developer builds a nice form, attaches
it to a large table, and then opens it..and the throws this form attached to
some huge table..and then tells the users to go have at and have fun. Don't
we have any kind of concern for those poor users? Often, the user will not
even know how to search for something ! (so, prompt, and asking the user
also makes a HUGE leap forward in usability. And, the big bonus is reduced
network traffic too!...Gosh...better and faster, and less network
traffic....what more do we want!).

** Don't use quires that require more then one linked table

(this ONLY
applies to odbc to sql server...you CAN and are FREE to do this with
a mdb JET file share).

When you use
ODBC, one table could be on the corporate server, and the other ODBC might
be a FoxPro table link 3 computers from the left of you. As a result..JET
has a real difficult time joining these tables together..and JET can not
assume that the two tables are on the same box..and thus have the "box" join
the tables. Thus,while jet does it best..these types of joins can often be
real slow. The simple solution in these cases is to change the query to
view..and link to that. This is the least amount of work, and means the
joins occur on the server side. This also applies to combo boxes. Most
combos boxes has sql embedded in them. That sql has to be processed, and
then thrown to a linked odbc table. This is a bit sluggish. (a form can have
maybe one, or two combos..but after that ..it will start to load slow). So,
remove the sql from the combo box, build a view..and link the combo box
direct to that view (JUST USE the view name...the sort, and any sql need to
be in the view). The result is quite good combo box load performance. (and
again, not very much work. There are other approaches that can even speed
this up more..but we have to balanced the benefits VS. the amount of work
and coding. I don't think once should re-code all combo boxes to a call back
with a pass-through reocrdset..but that can be a solution also).

If you are using a ADP access project, the above points about the joins
with more then one table does NOT apply..since all queries execute
on the sql server side. (perhaps you could consider converting the
application to a ADP project. It would at least force you to make
most sql run on the server side. However, ODBC is just fine
and is usually EQUAL in performance if you do things right).

** Of course, if you do have sql with more then one table..then pass-though
is the best if using odbc. (again..this does NOT apply to a mdb JET file
share).

** You can continue to use bound forms..but as mentioned..restrict the form
to the one record you need. You can safely open up to a single invoice,a and
even continue to use the "where" clause of the openform. Bound forms are way
less work then un-bound forms...and performance is generally just is good
anyway when done right.

** Large loading of combo boxes. A combo box is good for about 100
entries. After that..you are torturing the user (what..they got to look
through 100's of entries). So, keep things like combo boxes down
to a min size. This is both faster..and MORE importantly it is
kinder to your users.

After all, at the end of the day..what we really want is to make
things easy for the users...and treat them well.. It seems that
treating the users well, and reducfing the bandwith
(amount of data) goes hand in hand. So, better applications
treat the usres well..and run faster! (this is good news!)
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top