D
Dfly
how can i find someone that i can give my required info to and have them
design my database for me?
design my database for me?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
D
Daniel Pineault
Many of us here can provide you with our service for a fee (see my website
below for contact information) or there are also specialized websites for
hiring developers.
That said, this site is here to help you develop your own solution. If your
have the want to learn, we can help you reach your goal by providing guidance
as required.
--
Hope this helps,
Daniel Pineault
http://www.cardaconsultants.com/
For Access Tips and Examples: http://www.devhut.net
Please rate this post using the vote buttons if it was helpful.
below for contact information) or there are also specialized websites for
hiring developers.
That said, this site is here to help you develop your own solution. If your
have the want to learn, we can help you reach your goal by providing guidance
as required.
--
Hope this helps,
Daniel Pineault
http://www.cardaconsultants.com/
For Access Tips and Examples: http://www.devhut.net
Please rate this post using the vote buttons if it was helpful.
D
Dfly
Thank you Daniel,
It's not that I don't want to learn. I just don't have the time. I volunteer
for a non-profit organization that helps abused children and I am the
secretary for my chapter and the state. I have to track so much information
that it has become difficult to handle just using excel. I have never used
access and when I started looking into it I quickly figured out that it was
something that would help. At this point it would be best if I just pay
someone to help me get started. I will check out your website.
Thanks again
It's not that I don't want to learn. I just don't have the time. I volunteer
for a non-profit organization that helps abused children and I am the
secretary for my chapter and the state. I have to track so much information
that it has become difficult to handle just using excel. I have never used
access and when I started looking into it I quickly figured out that it was
something that would help. At this point it would be best if I just pay
someone to help me get started. I will check out your website.
Thanks again
K
Keith Wilby
Dfly said:Thank you Daniel,
It's not that I don't want to learn. I just don't have the time. I
volunteer
for a non-profit organization that helps abused children and I am the
secretary for my chapter and the state. I have to track so much
information
that it has become difficult to handle just using excel. I have never used
access and when I started looking into it I quickly figured out that it
was
something that would help. At this point it would be best if I just pay
someone to help me get started. I will check out your website.
Hiring a developer is probably the way to go then. The thing to bear in
mind is that Excel is a tool whereas Access is a toolbox. Access provides
you with the tools to build an application, whereas Excel is an application
straight out of the box.
Good luck.
Keith.
www.keithwilby.co.uk
D
Daniel Pineault
FYI, whomever you choose to move forward with, ensure you mention that this
is for a charity. many of us will cut our costs for a good cause.
--
Hope this helps,
Daniel Pineault
http://www.cardaconsultants.com/
For Access Tips and Examples: http://www.devhut.net
Please rate this post using the vote buttons if it was helpful.
is for a charity. many of us will cut our costs for a good cause.
--
Hope this helps,
Daniel Pineault
http://www.cardaconsultants.com/
For Access Tips and Examples: http://www.devhut.net
Please rate this post using the vote buttons if it was helpful.
S
Steve
I provide help with Access and Excel applications for a modest fee. I can
design your database for a very reasonable fee. Contact me at
(e-mail address removed).
Steve
design your database for a very reasonable fee. Contact me at
(e-mail address removed).
Steve
J
John... Visio MVP
Steve said:I provide help with Access and Excel applications for a modest fee. I can
design your database for a very reasonable fee. Contact me at
(e-mail address removed).
Steve
You do not provide help and you have proven many times that you are hopeless
at Word AND Excel. Why do you not grow up and go away?
These newsgroups are provided by Microsoft for FREE peer to peer support.
Stevie is a long term troll who suffers from the delusion that he thinks he
knows what he is talking about. If he was any good, his repeat business
should keep from needing to cruise the Access newsgroups and begging for
work.
John... Visio MVP
C
Chris O'C via AccessMonster.com
If that's your situation you should hire an expert to do it for you. I
develop Access databases and I give discounts to charities. Also for a
limited time, I offer Microsoft Windows Vista Ultimate (retails for $320) or
Microsoft Office 2007 Professional (retails for $500) to customers who
purchase at least $1200 (for free Vista) or $1500 (for free Office) of
software from me.
Please contact me if you're interested. chrisomvp at gmail period com.
Chris
Microsoft MVP
develop Access databases and I give discounts to charities. Also for a
limited time, I offer Microsoft Windows Vista Ultimate (retails for $320) or
Microsoft Office 2007 Professional (retails for $500) to customers who
purchase at least $1200 (for free Vista) or $1500 (for free Office) of
software from me.
Please contact me if you're interested. chrisomvp at gmail period com.
Chris
Microsoft MVP
It's not that I don't want to learn. I just don't have the time. I volunteer
for a non-profit organization that helps abused children and I am the
secretary for my chapter and the state. I have to track so much information
that it has become difficult to handle just using excel. I have never used
access and when I started looking into it I quickly figured out that it was
something that would help. At this point it would be best if I just pay
someone to help me get started. I will check out your website.
Thanks again[quoted text clipped - 6 lines]Many of us here can provide you with our service for a fee (see my website
below for contact information) or there are also specialized websites for
S
Steve
Dragonfly,
Ignore this vulcher. He is on a mission to maliciously persecute me for
every offer of help I make. You can note that he does not make any responses
to help posters in these newsgroups. A large legal action is being prepared
for his malicious conduct in a public forum. Please look at my other posts
in this newsgroup ...
HELP! DB Design to later query multiple keywords
Trying to find the best way to structure this . . .
How to manage images (jpg or png small photos)?
Steve
(e-mail address removed)
Ignore this vulcher. He is on a mission to maliciously persecute me for
every offer of help I make. You can note that he does not make any responses
to help posters in these newsgroups. A large legal action is being prepared
for his malicious conduct in a public forum. Please look at my other posts
in this newsgroup ...
HELP! DB Design to later query multiple keywords
Trying to find the best way to structure this . . .
How to manage images (jpg or png small photos)?
Steve
(e-mail address removed)
S
Steve
Another legal action is being prepared against you for making this
slanderous website and against your website host for hosting a slanderous
website.
slanderous website and against your website host for hosting a slanderous
website.
K
Keith Wilby
Steve said:Another legal action is being prepared against you for making this
slanderous website and against your website host for hosting a slanderous
website.
Slander: "the act or offence of saying something false or malicious that
damages somebody's reputation."
The key word there is "saying". You want to to try again? You want to get
your lawyer to look up the word "libel"? Even if you were preparing action
against that web site you would lose because every point raised contains a
link to prove it. To *prove* it Steve. Get your lawyer to look up that
word too.
K
Keith Wilby
Steve said:Dragonfly,
A large legal action is being prepared
What, big letters on A3 sheets? Joined-up writing or block caps?
K
Keith Wilby
Steve said:Dragonfly,
Please look at my other posts in this newsgroup ...
Not forgetting:
MS Access Template: Service Call Management Database
After School Attendance
Design question - tables with scores
Standard Operating Procedures - How to Manual
Help, Trying to build a Non-Profit database for my Dad
Help with Database design!!!!!
Need help setting up a complex project database
Designing a Data Base for School Exam Purposes
General Personnel Database
In fact, all anyone need do to gain the truth is to search for "modest fee"
and "My fee is very reasonable".
J
Jeff Boyce
If you decide to hire someone to help, you'll need to decide which approach
you'll want them to use in developing your application.
One approach to development tries to uncover all possible requirements
before coding starts. Any changes in the environment, funding sources,
technology, etc. could lead to "change orders". Any "oh, by the way, did I
mention...?" could lead to change orders. Any "we didn't cover this when we
laid out the requirements" could lead to change orders. Any "our
requirements have changed" will lead to change orders...
Another approach to development acknowledges that there's little chance of
uncovering ALL the requirements, before beginning and focuses instead on
which of the known requirements are most critical (i.e., highest impact
and/or greatest risk). By solving those issues first, the customer receives
something of value from nearly the start and can decide whether to pull the
plug on the project early on. Each iteration focuses on the most critical
requirements remaining, so the impact/risk goes down with each successive
iteration.
The former is something of a "pay now and pay later" approach. The latter
is something of a "pay as you go" approach.
If you use the former, the contractor you hire will have to 'pad' the job
cost estimate to ensure that those little surprises don't eat his/her
profit.
If you use the latter, you will have something of value after each
iteration. An "iteration" could be as brief as you decide (a couple hours,
a couple days, a couple weeks). It's a lot easier for both you and your
contractor to estimate how much it will cost to do a 2-day job than to try
to estimate a total job that could take 2 months.
Good luck on your project!
--
Regards
Jeff Boyce
www.InformationFutures.net
Microsoft Office/Access MVP
Microsoft IT Academy Program Mentor
http://microsoftitacademy.com/
you'll want them to use in developing your application.
One approach to development tries to uncover all possible requirements
before coding starts. Any changes in the environment, funding sources,
technology, etc. could lead to "change orders". Any "oh, by the way, did I
mention...?" could lead to change orders. Any "we didn't cover this when we
laid out the requirements" could lead to change orders. Any "our
requirements have changed" will lead to change orders...
Another approach to development acknowledges that there's little chance of
uncovering ALL the requirements, before beginning and focuses instead on
which of the known requirements are most critical (i.e., highest impact
and/or greatest risk). By solving those issues first, the customer receives
something of value from nearly the start and can decide whether to pull the
plug on the project early on. Each iteration focuses on the most critical
requirements remaining, so the impact/risk goes down with each successive
iteration.
The former is something of a "pay now and pay later" approach. The latter
is something of a "pay as you go" approach.
If you use the former, the contractor you hire will have to 'pad' the job
cost estimate to ensure that those little surprises don't eat his/her
profit.
If you use the latter, you will have something of value after each
iteration. An "iteration" could be as brief as you decide (a couple hours,
a couple days, a couple weeks). It's a lot easier for both you and your
contractor to estimate how much it will cost to do a 2-day job than to try
to estimate a total job that could take 2 months.
Good luck on your project!
--
Regards
Jeff Boyce
www.InformationFutures.net
Microsoft Office/Access MVP
Microsoft IT Academy Program Mentor
http://microsoftitacademy.com/
L
Larry Daugherty
Wow! One of the understood rules for these Access newsgroups is that
they are not for the solicitation of service (offers of work). If you
are a total newbie to them then you couldn't know that. Another
understood rule is that they are also not for offers of service for
hire. It used to be that there was only one persistent violator of
that second rule. He has very specifically offered his services for a
fee in this thread.
There are yet other rules and, in the evident spirit of the season, I
intend to break one myself: There will also be no free programming or
other free service delivered other than the posting of advice to those
who post issues.
I, too, sometimes discount my fees heavily for selected charities. I
do so in this case; Pro Bono.
If you can decode my email address and start a dialogue by sending me
the first cut of your requirements and your contact info then we can
explore the possibility of my helping you.
I guarantee nothing at the outset. Your requirements may exceed my
humble capabilities.
Jeff Boyce listed a few of the paradigms of terms for negotiating and
defining a project and setting terms. I'm one of the "hard case" type
of developer who works very hard with the client to get as much
defined and quantified as possible before any code is written. It's
worth taking the time to develop an understanding of your needs and
wishes and getting things quantified to the extent practical. Once we
are in agreement as to what we're doing, the specification will be
frozen. I will then confine my design to fulfilling the requirements
and there will be none of those things that might require "change
orders" allowed until that design is completed. No, not even that one
tiny little thing.
Once I submit a prototype or two for your evaluation you will likely
see things you would like to have differently or additionally. Do,
indeed, tell me what those things are and we'll both maintain lists of
things for "phase 2" or for the all encompassing "change order" to
follow. But nothing will be done on those late discoveries until our
original specification has been executed completely and evaluated by
you.
Those conditions are exactly the same as those I observe for contracts
where money is involved. I don't submit a bid until the specification
is "signed". That protects both parties.
My fee in this case will be $0.00 plus attribution.
This offer extends only to the original specification and to those
things we will have discussed and listed and agreed for follow-on
while the initial specification is being executed.
This is in anticipation of my 1st New Year's resolution to take on a
pro bono project for a worthy cause.
By the way, some venues that welcome postings of work for hire are
guru.com
elance.com
getafreelancer.com
rentacoder.com
All ov them take their cut out of the service provider's hide.
Requests for bids are free.
HTH
they are not for the solicitation of service (offers of work). If you
are a total newbie to them then you couldn't know that. Another
understood rule is that they are also not for offers of service for
hire. It used to be that there was only one persistent violator of
that second rule. He has very specifically offered his services for a
fee in this thread.
There are yet other rules and, in the evident spirit of the season, I
intend to break one myself: There will also be no free programming or
other free service delivered other than the posting of advice to those
who post issues.
I, too, sometimes discount my fees heavily for selected charities. I
do so in this case; Pro Bono.
If you can decode my email address and start a dialogue by sending me
the first cut of your requirements and your contact info then we can
explore the possibility of my helping you.
I guarantee nothing at the outset. Your requirements may exceed my
humble capabilities.
Jeff Boyce listed a few of the paradigms of terms for negotiating and
defining a project and setting terms. I'm one of the "hard case" type
of developer who works very hard with the client to get as much
defined and quantified as possible before any code is written. It's
worth taking the time to develop an understanding of your needs and
wishes and getting things quantified to the extent practical. Once we
are in agreement as to what we're doing, the specification will be
frozen. I will then confine my design to fulfilling the requirements
and there will be none of those things that might require "change
orders" allowed until that design is completed. No, not even that one
tiny little thing.
Once I submit a prototype or two for your evaluation you will likely
see things you would like to have differently or additionally. Do,
indeed, tell me what those things are and we'll both maintain lists of
things for "phase 2" or for the all encompassing "change order" to
follow. But nothing will be done on those late discoveries until our
original specification has been executed completely and evaluated by
you.
Those conditions are exactly the same as those I observe for contracts
where money is involved. I don't submit a bid until the specification
is "signed". That protects both parties.
My fee in this case will be $0.00 plus attribution.
This offer extends only to the original specification and to those
things we will have discussed and listed and agreed for follow-on
while the initial specification is being executed.
This is in anticipation of my 1st New Year's resolution to take on a
pro bono project for a worthy cause.
By the way, some venues that welcome postings of work for hire are
guru.com
elance.com
getafreelancer.com
rentacoder.com
All ov them take their cut out of the service provider's hide.
Requests for bids are free.
HTH
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.