Visio Beta Question

C

Coffeecoco930

I am currently beta-testing Office 2007 (the first release that expires on
Feb 7) and was getting ready to download and installed the TR version.
However, I did have a couple of questions regarding the TR and they were
answered to my satisfaction. One of the things I learned is Vision 2007 is
needed. When I downloaded and installed the Office 2007 version, I did not
download the Visio beta version. Since Microsoft Visio Beta works the some
of the files in the Microsoft Office 2007 beta TR, how do I download and
installed the beta version and then install the Office 2007 TR? Any
suggestions, comments?
 
J

Jagadeesh .P [MSFT]

I think your question is how to install Visio 2007 Beta2 after installing
Office 2007 Beta2TR. If that is the case, following information can be
helpful:

Beta2 applications should not be installed after installing Beta2TR
applications. Kindly refer this web link for the known setup issues:
http://officebeta.iponet.net/en-us/products/FX101517941033.aspx#1

Following steps can help as the workaround for the requirement:

1. Uninstall all Office2007 Beta2TR applications

2. After a system restart, install Office 2007 Beta2

3. Then install Visio 2007 Beta2 [and any other Beta2 products that you
require]

4. After completing Beta2 installations, perform a system restart.

5. Then install Beta2TR versions of Office2007 , Visio2007 and other
applications.

Hope this helps!

Regards,
Jagadeesh. P

This posting is provided "AS IS" with no warranties, and confers no rights.
 
C

Coffeecoco930

Thank you are almost answering my question. I asked the correct question. I
have downloaded and installed Office 20007 Beta 2. I have only downloaded,
BUT NOT INSTALLED Office 2007 Beta 2 TR. I need to download and install
Vision Beta 2 first, then download and install the Visio Beta TR. I am going
to the link you provided and download the Visio Beta I need, if you sent me
to correct provided link.
--
Coffeecoco


Jagadeesh .P said:
I think your question is how to install Visio 2007 Beta2 after installing
Office 2007 Beta2TR. If that is the case, following information can be
helpful:

Beta2 applications should not be installed after installing Beta2TR
applications. Kindly refer this web link for the known setup issues:
http://officebeta.iponet.net/en-us/products/FX101517941033.aspx#1

Following steps can help as the workaround for the requirement:

1. Uninstall all Office2007 Beta2TR applications

2. After a system restart, install Office 2007 Beta2

3. Then install Visio 2007 Beta2 [and any other Beta2 products that you
require]

4. After completing Beta2 installations, perform a system restart.

5. Then install Beta2TR versions of Office2007 , Visio2007 and other
applications.

Hope this helps!

Regards,
Jagadeesh. P

This posting is provided "AS IS" with no warranties, and confers no rights.


Coffeecoco930 said:
I am currently beta-testing Office 2007 (the first release that expires on
Feb 7) and was getting ready to download and installed the TR version.
However, I did have a couple of questions regarding the TR and they were
answered to my satisfaction. One of the things I learned is Vision 2007
is
needed. When I downloaded and installed the Office 2007 version, I did
not
download the Visio beta version. Since Microsoft Visio Beta works the
some
of the files in the Microsoft Office 2007 beta TR, how do I download and
installed the beta version and then install the Office 2007 TR? Any
suggestions, comments?
 
C

Coffeecoco930

Thank you for your reply. I asked the correct question. I am currently
beta-testing Office 2007 Beta 2 with only a couple of minor inconviences.
Technical support has already received the error reporting messages. I
wanted to try the Beta TR, but need to download and install the Vision Beta,
which I did not download at first. That was the purpose of my question. I
downloaded the Beta TR, BUT HAVE NOT INSTALLED IT. I need to download the
Vision 2007 Beta first. If you have provided me with the correct link, I
should find what I need there. Thank you again.
--
Coffeecoco


Jagadeesh .P said:
I think your question is how to install Visio 2007 Beta2 after installing
Office 2007 Beta2TR. If that is the case, following information can be
helpful:

Beta2 applications should not be installed after installing Beta2TR
applications. Kindly refer this web link for the known setup issues:
http://officebeta.iponet.net/en-us/products/FX101517941033.aspx#1

Following steps can help as the workaround for the requirement:

1. Uninstall all Office2007 Beta2TR applications

2. After a system restart, install Office 2007 Beta2

3. Then install Visio 2007 Beta2 [and any other Beta2 products that you
require]

4. After completing Beta2 installations, perform a system restart.

5. Then install Beta2TR versions of Office2007 , Visio2007 and other
applications.

Hope this helps!

Regards,
Jagadeesh. P

This posting is provided "AS IS" with no warranties, and confers no rights.


Coffeecoco930 said:
I am currently beta-testing Office 2007 (the first release that expires on
Feb 7) and was getting ready to download and installed the TR version.
However, I did have a couple of questions regarding the TR and they were
answered to my satisfaction. One of the things I learned is Vision 2007
is
needed. When I downloaded and installed the Office 2007 version, I did
not
download the Visio beta version. Since Microsoft Visio Beta works the
some
of the files in the Microsoft Office 2007 beta TR, how do I download and
installed the beta version and then install the Office 2007 TR? Any
suggestions, comments?
 
C

Coffeecoco930

I clicked on the link you provided and the information was about known
problems with Visio 2007 Beta. That information did not answer my question.
I need the link to download and installed the Visio 2007 Beta. Any
suggestions?
--
Coffeecoco


Jagadeesh .P said:
I think your question is how to install Visio 2007 Beta2 after installing
Office 2007 Beta2TR. If that is the case, following information can be
helpful:

Beta2 applications should not be installed after installing Beta2TR
applications. Kindly refer this web link for the known setup issues:
http://officebeta.iponet.net/en-us/products/FX101517941033.aspx#1

Following steps can help as the workaround for the requirement:

1. Uninstall all Office2007 Beta2TR applications

2. After a system restart, install Office 2007 Beta2

3. Then install Visio 2007 Beta2 [and any other Beta2 products that you
require]

4. After completing Beta2 installations, perform a system restart.

5. Then install Beta2TR versions of Office2007 , Visio2007 and other
applications.

Hope this helps!

Regards,
Jagadeesh. P

This posting is provided "AS IS" with no warranties, and confers no rights.


Coffeecoco930 said:
I am currently beta-testing Office 2007 (the first release that expires on
Feb 7) and was getting ready to download and installed the TR version.
However, I did have a couple of questions regarding the TR and they were
answered to my satisfaction. One of the things I learned is Vision 2007
is
needed. When I downloaded and installed the Office 2007 version, I did
not
download the Visio beta version. Since Microsoft Visio Beta works the
some
of the files in the Microsoft Office 2007 beta TR, how do I download and
installed the beta version and then install the Office 2007 TR? Any
suggestions, comments?
 
J

Jagadeesh .P [MSFT]

Kindly check this link to download beta2 version of Office 2007 Products:

http://www.microsoft.com/office/preview/beta/download/en/default.mspx

Regards,
Jagadeesh. P

This posting is provided "AS IS" with no warranties, and confers no rights.

Coffeecoco930 said:
I clicked on the link you provided and the information was about known
problems with Visio 2007 Beta. That information did not answer my
question.
I need the link to download and installed the Visio 2007 Beta. Any
suggestions?
--
Coffeecoco


Jagadeesh .P said:
I think your question is how to install Visio 2007 Beta2 after installing
Office 2007 Beta2TR. If that is the case, following information can be
helpful:

Beta2 applications should not be installed after installing Beta2TR
applications. Kindly refer this web link for the known setup issues:
http://officebeta.iponet.net/en-us/products/FX101517941033.aspx#1

Following steps can help as the workaround for the requirement:

1. Uninstall all Office2007 Beta2TR applications

2. After a system restart, install Office 2007 Beta2

3. Then install Visio 2007 Beta2 [and any other Beta2 products that you
require]

4. After completing Beta2 installations, perform a system restart.

5. Then install Beta2TR versions of Office2007 , Visio2007 and other
applications.

Hope this helps!

Regards,
Jagadeesh. P

This posting is provided "AS IS" with no warranties, and confers no
rights.


message
I am currently beta-testing Office 2007 (the first release that expires
on
Feb 7) and was getting ready to download and installed the TR version.
However, I did have a couple of questions regarding the TR and they
were
answered to my satisfaction. One of the things I learned is Vision
2007
is
needed. When I downloaded and installed the Office 2007 version, I did
not
download the Visio beta version. Since Microsoft Visio Beta works the
some
of the files in the Microsoft Office 2007 beta TR, how do I download
and
installed the beta version and then install the Office 2007 TR? Any
suggestions, comments?
 
C

Coffeecoco930

Thank you so very much for supplying with the provided link. I just am about
to download Visio 2007 and will install it this afternoon.
--
Coffeecoco


Jagadeesh .P said:
Kindly check this link to download beta2 version of Office 2007 Products:

http://www.microsoft.com/office/preview/beta/download/en/default.mspx

Regards,
Jagadeesh. P

This posting is provided "AS IS" with no warranties, and confers no rights.

Coffeecoco930 said:
I clicked on the link you provided and the information was about known
problems with Visio 2007 Beta. That information did not answer my
question.
I need the link to download and installed the Visio 2007 Beta. Any
suggestions?
--
Coffeecoco


Jagadeesh .P said:
I think your question is how to install Visio 2007 Beta2 after installing
Office 2007 Beta2TR. If that is the case, following information can be
helpful:

Beta2 applications should not be installed after installing Beta2TR
applications. Kindly refer this web link for the known setup issues:
http://officebeta.iponet.net/en-us/products/FX101517941033.aspx#1

Following steps can help as the workaround for the requirement:

1. Uninstall all Office2007 Beta2TR applications

2. After a system restart, install Office 2007 Beta2

3. Then install Visio 2007 Beta2 [and any other Beta2 products that you
require]

4. After completing Beta2 installations, perform a system restart.

5. Then install Beta2TR versions of Office2007 , Visio2007 and other
applications.

Hope this helps!

Regards,
Jagadeesh. P

This posting is provided "AS IS" with no warranties, and confers no
rights.


message
I am currently beta-testing Office 2007 (the first release that expires
on
Feb 7) and was getting ready to download and installed the TR version.
However, I did have a couple of questions regarding the TR and they
were
answered to my satisfaction. One of the things I learned is Vision
2007
is
needed. When I downloaded and installed the Office 2007 version, I did
not
download the Visio beta version. Since Microsoft Visio Beta works the
some
of the files in the Microsoft Office 2007 beta TR, how do I download
and
installed the beta version and then install the Office 2007 TR? Any
suggestions, comments?
 
C

Coffeecoco930

Thank you so much for the link.
--
Coffeecoco


Jagadeesh .P said:
Kindly check this link to download beta2 version of Office 2007 Products:

http://www.microsoft.com/office/preview/beta/download/en/default.mspx

Regards,
Jagadeesh. P

This posting is provided "AS IS" with no warranties, and confers no rights.

Coffeecoco930 said:
I clicked on the link you provided and the information was about known
problems with Visio 2007 Beta. That information did not answer my
question.
I need the link to download and installed the Visio 2007 Beta. Any
suggestions?
--
Coffeecoco


Jagadeesh .P said:
I think your question is how to install Visio 2007 Beta2 after installing
Office 2007 Beta2TR. If that is the case, following information can be
helpful:

Beta2 applications should not be installed after installing Beta2TR
applications. Kindly refer this web link for the known setup issues:
http://officebeta.iponet.net/en-us/products/FX101517941033.aspx#1

Following steps can help as the workaround for the requirement:

1. Uninstall all Office2007 Beta2TR applications

2. After a system restart, install Office 2007 Beta2

3. Then install Visio 2007 Beta2 [and any other Beta2 products that you
require]

4. After completing Beta2 installations, perform a system restart.

5. Then install Beta2TR versions of Office2007 , Visio2007 and other
applications.

Hope this helps!

Regards,
Jagadeesh. P

This posting is provided "AS IS" with no warranties, and confers no
rights.


message
I am currently beta-testing Office 2007 (the first release that expires
on
Feb 7) and was getting ready to download and installed the TR version.
However, I did have a couple of questions regarding the TR and they
were
answered to my satisfaction. One of the things I learned is Vision
2007
is
needed. When I downloaded and installed the Office 2007 version, I did
not
download the Visio beta version. Since Microsoft Visio Beta works the
some
of the files in the Microsoft Office 2007 beta TR, how do I download
and
installed the beta version and then install the Office 2007 TR? Any
suggestions, comments?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top