No Files in this report

[Wolfe]

I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page provider.
I have the password, etc to publish this web pages/perform changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All Files
is activated, get the response "There are no files in this report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Steve Easton]

Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening FrontPage and
then selecting File > Open Web and then entering http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
...............................with a computer

 

[Tom Pepper Willett]

....also, do you have an actual web open (File | Open Web) or just a page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
----------------------------------------------------------------------------
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/

=====================================================

 

[Wolfe]

Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but on my
file/system it is beige/brown.

Wolfe

...also, do you have an actual web open (File | Open Web) or just a page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------- --
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================

Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening FrontPage and
then selecting File > Open Web and then entering http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer

 

[Wolfe]

I screwed it up, made changes try to download it
and now garbage.
Have to get in touch with the web provider again.

Wolfe

Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but on my
file/system it is beige/brown.

Wolfe

...also, do you have an actual web open (File | Open Web) or just a page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================

Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening FrontPage and
then selecting File > Open Web and then entering http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page provider.
I have the password, etc to publish this web pages/perform changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All Files
is activated, get the response "There are no files in this report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Steve Easton]

The address you gave returns a 404 page not found error.

Also, you really can't have just a page on your system and publish it. The page
*must* be contained inside a web.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
...............................with a computer

Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but on my
file/system it is beige/brown.

Wolfe

...also, do you have an actual web open (File | Open Web) or just a page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------- --
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================

Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening FrontPage and
then selecting File > Open Web and then entering http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page provider.
I have the password, etc to publish this web pages/perform changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All Files
is activated, get the response "There are no files in this report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Tom Pepper Willett]

I understand that you have a web page. But do you have a *web* created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
----------------------------------------------------------------------------
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/

=====================================================

Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but on my
file/system it is beige/brown.

Wolfe

...also, do you have an actual web open (File | Open Web) or just a page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================

Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening FrontPage and
then selecting File > Open Web and then entering http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page provider.
I have the password, etc to publish this web pages/perform changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All Files
is activated, get the response "There are no files in this report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Wolfe]

Tom and Steve,
Looks this site does not accept attachment.
Have sent to you individually the listed reply with attachment.
Let me know if you were unable to receive it.

Original reply:
Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web* created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------- --
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================

Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but on my
file/system it is beige/brown.

Wolfe

 

[Tom Pepper Willett]

Sorry, I don't open attachments posted in newsgroups.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
----------------------------------------------------------------------------
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/

=====================================================

Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web* created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================

Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but

on

my

 

[Steve Easton]

Using Windows, look in your My Documents folder.
Look for a folder with a blue globe on it. If you do not find one, you do not
have a web created on your machine.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
...............................with a computer

Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web* created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------- --
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================

Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but on my
file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web) or just a page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]

--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening
FrontPage and
then selecting File > Open Web and then entering http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page provider.
I have the password, etc to publish this web pages/perform changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All Files
is activated, get the response "There are no files in this report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Wolfe]

How can I send you the attachments?
Wolfe

Sorry, I don't open attachments posted in newsgroups.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------- --
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================

Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web* created
first, so you File | Open web to get the web page.

--------------------------------------------------------------------------

--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but

on

my
file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web) or just a
page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]

--------------------------------------------------------------------------

--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening
FrontPage and
then selecting File > Open Web and then entering
http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page provider.
I have the password, etc to publish this web pages/perform changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All Files
is activated, get the response "There are no files in this report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Wolfe]

Yes I have the file, the globe looks more like a stylish "e".
Wolfe

Using Windows, look in your My Documents folder.
Look for a folder with a blue globe on it. If you do not find one, you do not
have a web created on your machine.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer

Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web* created
first, so you File | Open web to get the web page.

--------------------------------------------------------------------------

--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but

on
my

file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web) or just a
page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]

--------------------------------------------------------------------------

--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening
FrontPage and
then selecting File > Open Web and then entering
http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page provider.
I have the password, etc to publish this web pages/perform changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All Files
is activated, get the response "There are no files in this report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Thomas A. Rowe]

The best option is to upload a image or the site to a public accessible web site, then provide a
link in a post back to the newsgroup.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================

How can I send you the attachments?
Wolfe

Sorry, I don't open attachments posted in newsgroups.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------- --
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================

Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web* created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]

--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but on
my
file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web) or just a
page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]



--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening
FrontPage and
then selecting File > Open Web and then entering
http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page provider.
I have the password, etc to publish this web pages/perform
changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All Files
is activated, get the response "There are no files in this
report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Wolfe]

Any suggestion of a public website which accept attachments?
Wolfe

The best option is to upload a image or the site to a public accessible web site, then provide a
link in a post back to the newsgroup.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================

How can I send you the attachments?
Wolfe

Sorry, I don't open attachments posted in newsgroups.

--------------------------------------------------------------------------

--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web* created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]

--------------------------------------------------------------------------

--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but
on
my
file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web) or

just
a

page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]

--------------------------------------------------------------------------

--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage

support
see:

http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening
FrontPage and
then selecting File > Open Web and then entering
http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page
provider.
I have the password, etc to publish this web pages/perform
changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All
Files
is activated, get the response "There are no files in this
report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Thomas A. Rowe]

You can use any free web space.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================

Any suggestion of a public website which accept attachments?
Wolfe

The best option is to upload a image or the site to a public accessible web site, then provide a
link in a post back to the newsgroup.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

How can I send you the attachments?
Wolfe

Sorry, I don't open attachments posted in newsgroups.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web*
created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]


--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but
on
my
file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web) or just
a
page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]




--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support
see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by
opening
FrontPage and
then selecting File > Open Web and then entering
http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page
provider.
I have the password, etc to publish this web pages/perform
changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All
Files
is activated, get the response "There are no files in this
report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Wolfe]

Please name some.
Wolfe

You can use any free web space.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================

Any suggestion of a public website which accept attachments?
Wolfe

The best option is to upload a image or the site to a public

accessible
web site, then provide a

link in a post back to the newsgroup.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

How can I send you the attachments?
Wolfe

Sorry, I don't open attachments posted in newsgroups.

--------------------------------------------------------------------------

--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web*
created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]

--------------------------------------------------------------------------

--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage

support
see:

http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is

blue
but

on
my
file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web)

or
just

a
page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]

--------------------------------------------------------------------------

--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support
see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by
opening
FrontPage and
then selecting File > Open Web and then entering
http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page
provider.
I have the password, etc to publish this web pages/perform
changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All
Files
is activated, get the response "There are no files in this
report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Thomas A. Rowe]

You will have to do a search, as I don't use any. I place to start is with your local ISP.

In IE address bar type:

? Free Web Hosting
--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================

Please name some.
Wolfe

You can use any free web space.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

Any suggestion of a public website which accept attachments?
Wolfe

The best option is to upload a image or the site to a public accessible
web site, then provide a
link in a post back to the newsgroup.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

How can I send you the attachments?
Wolfe

Sorry, I don't open attachments posted in newsgroups.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]

--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it
with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file
name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web*
created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]



--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support
see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve
direction,
but not sure if this is the one, as the background color is blue
but
on
my
file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web) or
just
a
page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]





--------------------------------------------------------------------------
--
-
Microsoft FrontPage:

http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage
support
see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by
opening
FrontPage and
then selecting File > Open Web and then entering
http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page
provider.
I have the password, etc to publish this web pages/perform
changes.

Now I would like to do it myself, but any changes
performed in
Microsoft Front Page is not recognized when
View/Reports/All
Files
is activated, get the response "There are no files in this
report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Steve Easton]

Thomas, I opened the zip and it contains one html file and 5 images.
It is *not* a web site nor is it in a web folder.


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
........................with a computer

The best option is to upload a image or the site to a public accessible web site, then provide a
link in a post back to the newsgroup.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================

How can I send you the attachments?
Wolfe

Sorry, I don't open attachments posted in newsgroups.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------- --
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web* created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]


--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but
on
my
file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web) or just a
page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]




--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening
FrontPage and
then selecting File > Open Web and then entering
http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page
provider.
I have the password, etc to publish this web pages/perform
changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All
Files
is activated, get the response "There are no files in this
report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Steve Easton]

It needs to be a yellow *Folder* icon with a blue Globe on the folder.

You need to create a new web name it, save it, and then drag your files into it.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
........................with a computer

Yes I have the file, the globe looks more like a stylish "e".
Wolfe

Using Windows, look in your My Documents folder.
Look for a folder with a blue globe on it. If you do not find one, you do not
have a web created on your machine.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer

Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web* created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but on
my
file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web) or just a
page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]


--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by opening
FrontPage and
then selecting File > Open Web and then entering
http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page provider.
I have the password, etc to publish this web pages/perform
changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All Files
is activated, get the response "There are no files in this
report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]

 

[Thomas A. Rowe]

You are brave!. I was just offering a suggest on how file should be posted to a public accessible
web site when requesting help and not post attachment to the newsgroup, since we don't know the
sender.

Even when I know the sender, I don't open attachments unless the sender has sent me a prior email
telling to expect email with an attachment, and I don't any on a public newsgroup.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================

Thomas, I opened the zip and it contains one html file and 5 images.
It is *not* a web site nor is it in a web folder.


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
.......................with a computer

The best option is to upload a image or the site to a public accessible web site, then provide a
link in a post back to the newsgroup.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

How can I send you the attachments?
Wolfe

Sorry, I don't open attachments posted in newsgroups.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Tom and Steve,
Originally the web provider had the attached web page on the site
as per attached file soapweb.zip
As mention in my email of today at 2:14PM, was trying to save it with
change but got it screwed up, Soapweb1.zip.

Just tried it again, received the following error message:
"Windows cannot access this folder. Make sure you typed the file name
correctly and that you have permission to access the folder.
Details:
220 cobalt.golden.net FTP server (BSDI version 7.00LS) ready.
530 User anonymous unknown"

The point is, was able to screw it up, but unable to correct it.

Thanks for your help
Wolfe

I understand that you have a web page. But do you have a *web*
created
first, so you File | Open web to get the web page.
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]


--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Hello Steve and Tom.
the web page is www.soapweb.ca
Yes I have a web page on my machine.
Have tried to open the web page on my system as per Steve direction,
but not sure if this is the one, as the background color is blue but
on
my
file/system it is beige/brown.

Wolfe


...also, do you have an actual web open (File | Open Web) or just
a
page?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]




--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support
see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Do you have a copy of the entire web on your machine??

Also, can you open the "published" site using FrontPage by
opening
FrontPage and
then selecting File > Open Web and then entering
http://yourwebsite.com


--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed..................
..............................with a computer


I am a beginner utilizing Microsoft Front Page.
Had a web page published with the assistance of web page
provider.
I have the password, etc to publish this web pages/perform
changes.

Now I would like to do it myself, but any changes performed in
Microsoft Front Page is not recognized when View/Reports/All
Files
is activated, get the response "There are no files in this
report".
Also "Publish Web" is greyed out.

Any idea what I am doing wrong?

Thank you

Wolfe
[email protected]