Office 2007 install error

[DanielEtchells]

When trying to install office 2007 beta 2 I am getting the folowing error

setup could not find any available products to install

the install is running on vista build 5384.

I have tried extracting the file to a folder and running the setup from
there but still get the same error is anyone else having this issue or any
ideas on a solution?

Thanks

 

[Bob Buckland ?:-\)]

Hi Daniel,

How are you doing the extraction? It's a CD Image of the MS Office 2007 professional edition beta product that is in the download.
Here are some steps that may be helpful.
===========
1. Use Start=>Programs=>Accessories=>Disk Cleanup
clear your Internet files and temp files.


2. Locate your 2007 Office Professional Beta 2
download file and note the folder/path location.


3. Create a new folder on your PC and note that
folder/path location.


4. Use Start=>Run , and on a single line type in
the following (using the path & file names from Step 2 & 3)
and leaving out the brackets


"drive:\Step2PathOfDownload\downloadfilename.exe" /extract:"Step3path"


example: (assuming you saved to a 'downloads' folder and created a new folder named Off2007ProB2CD1) the Start=>Run line would look
like this


"c:\downloads\OPPLUS-EN.EXE" /extract:"C:\Off2007ProB2CD1"


If the extraction is successful (you'll get a dialog box telling you it was after a few minutes) then


a. Backup your files and shutdown all other running apps and utilities including antivirus.
b. Run setup from your new 2007 Office system folder you
created in the previous steps


Else, if the extraction doesn't succeed then the download may be damaged/corrupted.
Use Start=>Run and type
%temp%
and locate the Setup-xxxxx.log
(file) just created and see if it has any clues on where the extraction failed.


Post back here with your results please.
=========
When trying to install office 2007 beta 2 I am getting the folowing error

setup could not find any available products to install

the install is running on vista build 5384.

I have tried extracting the file to a folder and running the setup from
there but still get the same error is anyone else having this issue or any
ideas on a solution?

Thanks >>
--
I hope this helped you,

Bob Buckland ?
MS Office system products MVP

LINKS for the 2007 Office System

1. Read about it, try it, or watch the movie
the 2007 Microsoft Office system iinfo is at
http://microsoft.com/office/preview

2. Already have 2007 Office System Beta 2?
Send Microsoft your feedback (with pictures)
http://sas.office.microsoft.com/

3. Use the 2007 OfficeOnline website without Office2007

a. Install the ActiveX access control
http://office.microsoft.com/search/redir.aspx?AssetID=XT101650581033
b. then visit http://officebeta.iponet.net

 

[Bob Buckland ?:-\)]

Hi Daniel,

How are you doing the extraction? It's a CD Image of the MS Office 2007 professional edition beta product that is in the download.
Here are some steps that may be helpful.
===========
1. Use Start=>Programs=>Accessories=>Disk Cleanup
clear your Internet files and temp files.


2. Locate your 2007 Office Professional Beta 2
download file and note the folder/path location.


3. Create a new folder on your PC and note that
folder/path location.


4. Use Start=>Run , and on a single line type in
the following (using the path & file names from Step 2 & 3)
and leaving out the brackets


"drive:\Step2PathOfDownload\downloadfilename.exe" /extract:"Step3path"


example: (assuming you saved to a 'downloads' folder and created a new folder named Off2007ProB2CD1) the Start=>Run line would look
like this


"c:\downloads\OPPLUS-EN.EXE" /extract:"C:\Off2007ProB2CD1"


If the extraction is successful (you'll get a dialog box telling you it was after a few minutes) then


a. Backup your files and shutdown all other running apps and utilities including antivirus.
b. Run setup from your new 2007 Office system folder you
created in the previous steps


Else, if the extraction doesn't succeed then the download may be damaged/corrupted.
Use Start=>Run and type
%temp%
and locate the Setup-xxxxx.log
(file) just created and see if it has any clues on where the extraction failed.


Post back here with your results please.
=========
When trying to install office 2007 beta 2 I am getting the folowing error

setup could not find any available products to install

the install is running on vista build 5384.

I have tried extracting the file to a folder and running the setup from
there but still get the same error is anyone else having this issue or any
ideas on a solution?

Thanks >>
--
I hope this helped you,

Bob Buckland ?
MS Office system products MVP

LINKS for the 2007 Office System

1. Read about it, try it, or watch the movie
the 2007 Microsoft Office system iinfo is at
http://microsoft.com/office/preview

2. Already have 2007 Office System Beta 2?
Send Microsoft your feedback (with pictures)
http://sas.office.microsoft.com/

3. Use the 2007 OfficeOnline website without Office2007

a. Install the ActiveX access control
http://office.microsoft.com/search/redir.aspx?AssetID=XT101650581033
b. then visit http://officebeta.iponet.net

 

[Bob Buckland ?:-\)]

Hi Daniel,

How are you doing the extraction? It's a CD Image of the MS Office 2007 professional edition beta product that is in the download.
Here are some steps that may be helpful.
===========
1. Use Start=>Programs=>Accessories=>Disk Cleanup
clear your Internet files and temp files.


2. Locate your 2007 Office Professional Beta 2
download file and note the folder/path location.


3. Create a new folder on your PC and note that
folder/path location.


4. Use Start=>Run , and on a single line type in
the following (using the path & file names from Step 2 & 3)
and leaving out the brackets


"drive:\Step2PathOfDownload\downloadfilename.exe" /extract:"Step3path"


example: (assuming you saved to a 'downloads' folder and created a new folder named Off2007ProB2CD1) the Start=>Run line would look
like this


"c:\downloads\OPPLUS-EN.EXE" /extract:"C:\Off2007ProB2CD1"


If the extraction is successful (you'll get a dialog box telling you it was after a few minutes) then


a. Backup your files and shutdown all other running apps and utilities including antivirus.
b. Run setup from your new 2007 Office system folder you
created in the previous steps


Else, if the extraction doesn't succeed then the download may be damaged/corrupted.
Use Start=>Run and type
%temp%
and locate the Setup-xxxxx.log
(file) just created and see if it has any clues on where the extraction failed.


Post back here with your results please.
=========
When trying to install office 2007 beta 2 I am getting the folowing error

setup could not find any available products to install

the install is running on vista build 5384.

I have tried extracting the file to a folder and running the setup from
there but still get the same error is anyone else having this issue or any
ideas on a solution?

Thanks >>
--
I hope this helped you,

Bob Buckland ?
MS Office system products MVP

LINKS for the 2007 Office System

1. Read about it, try it, or watch the movie
the 2007 Microsoft Office system iinfo is at
http://microsoft.com/office/preview

2. Already have 2007 Office System Beta 2?
Send Microsoft your feedback (with pictures)
http://sas.office.microsoft.com/

3. Use the 2007 OfficeOnline website without Office2007

a. Install the ActiveX access control
http://office.microsoft.com/search/redir.aspx?AssetID=XT101650581033
b. then visit http://officebeta.iponet.net

 

[Bob Buckland ?:-\)]

Hi Daniel,

How are you doing the extraction? It's a CD Image of the MS Office 2007 professional edition beta product that is in the download.
Here are some steps that may be helpful.
===========
1. Use Start=>Programs=>Accessories=>Disk Cleanup
clear your Internet files and temp files.


2. Locate your 2007 Office Professional Beta 2
download file and note the folder/path location.


3. Create a new folder on your PC and note that
folder/path location.


4. Use Start=>Run , and on a single line type in
the following (using the path & file names from Step 2 & 3)
and leaving out the brackets


"drive:\Step2PathOfDownload\downloadfilename.exe" /extract:"Step3path"


example: (assuming you saved to a 'downloads' folder and created a new folder named Off2007ProB2CD1) the Start=>Run line would look
like this


"c:\downloads\OPPLUS-EN.EXE" /extract:"C:\Off2007ProB2CD1"


If the extraction is successful (you'll get a dialog box telling you it was after a few minutes) then


a. Backup your files and shutdown all other running apps and utilities including antivirus.
b. Run setup from your new 2007 Office system folder you
created in the previous steps


Else, if the extraction doesn't succeed then the download may be damaged/corrupted.
Use Start=>Run and type
%temp%
and locate the Setup-xxxxx.log
(file) just created and see if it has any clues on where the extraction failed.


Post back here with your results please.
=========
When trying to install office 2007 beta 2 I am getting the folowing error

setup could not find any available products to install

the install is running on vista build 5384.

I have tried extracting the file to a folder and running the setup from
there but still get the same error is anyone else having this issue or any
ideas on a solution?

Thanks >>
--
I hope this helped you,

Bob Buckland ?
MS Office system products MVP

LINKS for the 2007 Office System

1. Read about it, try it, or watch the movie
the 2007 Microsoft Office system iinfo is at
http://microsoft.com/office/preview

2. Already have 2007 Office System Beta 2?
Send Microsoft your feedback (with pictures)
http://sas.office.microsoft.com/

3. Use the 2007 OfficeOnline website without Office2007

a. Install the ActiveX access control
http://office.microsoft.com/search/redir.aspx?AssetID=XT101650581033
b. then visit http://officebeta.iponet.net

 

[Bob Buckland ?:-\)]

Hi Daniel,

How are you doing the extraction? It's a CD Image of the MS Office 2007 professional edition beta product that is in the download.
Here are some steps that may be helpful.
===========
1. Use Start=>Programs=>Accessories=>Disk Cleanup
clear your Internet files and temp files.


2. Locate your 2007 Office Professional Beta 2
download file and note the folder/path location.


3. Create a new folder on your PC and note that
folder/path location.


4. Use Start=>Run , and on a single line type in
the following (using the path & file names from Step 2 & 3)
and leaving out the brackets


"drive:\Step2PathOfDownload\downloadfilename.exe" /extract:"Step3path"


example: (assuming you saved to a 'downloads' folder and created a new folder named Off2007ProB2CD1) the Start=>Run line would look
like this


"c:\downloads\OPPLUS-EN.EXE" /extract:"C:\Off2007ProB2CD1"


If the extraction is successful (you'll get a dialog box telling you it was after a few minutes) then


a. Backup your files and shutdown all other running apps and utilities including antivirus.
b. Run setup from your new 2007 Office system folder you
created in the previous steps


Else, if the extraction doesn't succeed then the download may be damaged/corrupted.
Use Start=>Run and type
%temp%
and locate the Setup-xxxxx.log
(file) just created and see if it has any clues on where the extraction failed.


Post back here with your results please.
=========
When trying to install office 2007 beta 2 I am getting the folowing error

setup could not find any available products to install

the install is running on vista build 5384.

I have tried extracting the file to a folder and running the setup from
there but still get the same error is anyone else having this issue or any
ideas on a solution?

Thanks >>
--
I hope this helped you,

Bob Buckland ?
MS Office system products MVP

LINKS for the 2007 Office System

1. Read about it, try it, or watch the movie
the 2007 Microsoft Office system iinfo is at
http://microsoft.com/office/preview

2. Already have 2007 Office System Beta 2?
Send Microsoft your feedback (with pictures)
http://sas.office.microsoft.com/

3. Use the 2007 OfficeOnline website without Office2007

a. Install the ActiveX access control
http://office.microsoft.com/search/redir.aspx?AssetID=XT101650581033
b. then visit http://officebeta.iponet.net

 

[Bob Buckland ?:-\)]

Hi Daniel,

How are you doing the extraction? It's a CD Image of the MS Office 2007 professional edition beta product that is in the download.
Here are some steps that may be helpful.
===========
1. Use Start=>Programs=>Accessories=>Disk Cleanup
clear your Internet files and temp files.


2. Locate your 2007 Office Professional Beta 2
download file and note the folder/path location.


3. Create a new folder on your PC and note that
folder/path location.


4. Use Start=>Run , and on a single line type in
the following (using the path & file names from Step 2 & 3)
and leaving out the brackets


"drive:\Step2PathOfDownload\downloadfilename.exe" /extract:"Step3path"


example: (assuming you saved to a 'downloads' folder and created a new folder named Off2007ProB2CD1) the Start=>Run line would look
like this


"c:\downloads\OPPLUS-EN.EXE" /extract:"C:\Off2007ProB2CD1"


If the extraction is successful (you'll get a dialog box telling you it was after a few minutes) then


a. Backup your files and shutdown all other running apps and utilities including antivirus.
b. Run setup from your new 2007 Office system folder you
created in the previous steps


Else, if the extraction doesn't succeed then the download may be damaged/corrupted.
Use Start=>Run and type
%temp%
and locate the Setup-xxxxx.log
(file) just created and see if it has any clues on where the extraction failed.


Post back here with your results please.
=========
When trying to install office 2007 beta 2 I am getting the folowing error

setup could not find any available products to install

the install is running on vista build 5384.

I have tried extracting the file to a folder and running the setup from
there but still get the same error is anyone else having this issue or any
ideas on a solution?

Thanks >>
--
I hope this helped you,

Bob Buckland ?
MS Office system products MVP

LINKS for the 2007 Office System

1. Read about it, try it, or watch the movie
the 2007 Microsoft Office system iinfo is at
http://microsoft.com/office/preview

2. Already have 2007 Office System Beta 2?
Send Microsoft your feedback (with pictures)
http://sas.office.microsoft.com/

3. Use the 2007 OfficeOnline website without Office2007

a. Install the ActiveX access control
http://office.microsoft.com/search/redir.aspx?AssetID=XT101650581033
b. then visit http://officebeta.iponet.net

 

[Bob Buckland ?:-\)]

Hi Daniel,

How are you doing the extraction? It's a CD Image of the MS Office 2007 professional edition beta product that is in the download.
Here are some steps that may be helpful.
===========
1. Use Start=>Programs=>Accessories=>Disk Cleanup
clear your Internet files and temp files.


2. Locate your 2007 Office Professional Beta 2
download file and note the folder/path location.


3. Create a new folder on your PC and note that
folder/path location.


4. Use Start=>Run , and on a single line type in
the following (using the path & file names from Step 2 & 3)
and leaving out the brackets


"drive:\Step2PathOfDownload\downloadfilename.exe" /extract:"Step3path"


example: (assuming you saved to a 'downloads' folder and created a new folder named Off2007ProB2CD1) the Start=>Run line would look
like this


"c:\downloads\OPPLUS-EN.EXE" /extract:"C:\Off2007ProB2CD1"


If the extraction is successful (you'll get a dialog box telling you it was after a few minutes) then


a. Backup your files and shutdown all other running apps and utilities including antivirus.
b. Run setup from your new 2007 Office system folder you
created in the previous steps


Else, if the extraction doesn't succeed then the download may be damaged/corrupted.
Use Start=>Run and type
%temp%
and locate the Setup-xxxxx.log
(file) just created and see if it has any clues on where the extraction failed.


Post back here with your results please.
=========
When trying to install office 2007 beta 2 I am getting the folowing error

setup could not find any available products to install

the install is running on vista build 5384.

I have tried extracting the file to a folder and running the setup from
there but still get the same error is anyone else having this issue or any
ideas on a solution?

Thanks >>
--
I hope this helped you,

Bob Buckland ?
MS Office system products MVP

LINKS for the 2007 Office System

1. Read about it, try it, or watch the movie
the 2007 Microsoft Office system iinfo is at
http://microsoft.com/office/preview

2. Already have 2007 Office System Beta 2?
Send Microsoft your feedback (with pictures)
http://sas.office.microsoft.com/

3. Use the 2007 OfficeOnline website without Office2007

a. Install the ActiveX access control
http://office.microsoft.com/search/redir.aspx?AssetID=XT101650581033
b. then visit http://officebeta.iponet.net

 

[DanielEtchells]

Hi Bob,

I have now sorted it out. I had extracted it using the switch but under
Vista it kept only extracting half of the files but said the extraction was
finished.

Solution was to extract it on a xp pro laptop and burn the files to a disk.
The install is appears to be running fine now

Thanks for the sugestion anyway

Dan

 

[DanielEtchells]

Hi Bob,

I have now sorted it out. I had extracted it using the switch but under
Vista it kept only extracting half of the files but said the extraction was
finished.

Solution was to extract it on a xp pro laptop and burn the files to a disk.
The install is appears to be running fine now

Thanks for the sugestion anyway

Dan

 

[DanielEtchells]

Hi Bob,

I have now sorted it out. I had extracted it using the switch but under
Vista it kept only extracting half of the files but said the extraction was
finished.

Solution was to extract it on a xp pro laptop and burn the files to a disk.
The install is appears to be running fine now

Thanks for the sugestion anyway

Dan

 

[DanielEtchells]

Hi Bob,

I have now sorted it out. I had extracted it using the switch but under
Vista it kept only extracting half of the files but said the extraction was
finished.

Solution was to extract it on a xp pro laptop and burn the files to a disk.
The install is appears to be running fine now

Thanks for the sugestion anyway

Dan

 

[DanielEtchells]

Hi Bob,

I have now sorted it out. I had extracted it using the switch but under
Vista it kept only extracting half of the files but said the extraction was
finished.

Solution was to extract it on a xp pro laptop and burn the files to a disk.
The install is appears to be running fine now

Thanks for the sugestion anyway

Dan

 

[DanielEtchells]

Hi Bob,

I have now sorted it out. I had extracted it using the switch but under
Vista it kept only extracting half of the files but said the extraction was
finished.

Solution was to extract it on a xp pro laptop and burn the files to a disk.
The install is appears to be running fine now

Thanks for the sugestion anyway

Dan

 

[DanielEtchells]

Hi Bob,

I have now sorted it out. I had extracted it using the switch but under
Vista it kept only extracting half of the files but said the extraction was
finished.

Solution was to extract it on a xp pro laptop and burn the files to a disk.
The install is appears to be running fine now

Thanks for the sugestion anyway

Dan

 

[msnigres]

Hi Bob,

I am also having the same problem.

The first time that I tried to install I received the following
message:
"The instalation of this package failed"


After I did what you suggested receive the following message:
"Setup could not find any available products to install.
Please contact your system administrator"

Will it be that my download this cracked?

I am in await it...


DanielEtchells escreveu:

 

[msnigres]

Hi Bob,

I am also having the same problem.

The first time that I tried to install I received the following
message:
"The instalation of this package failed"


After I did what you suggested receive the following message:
"Setup could not find any available products to install.
Please contact your system administrator"

Will it be that my download this cracked?

I am in await it...


DanielEtchells escreveu:

 

[msnigres]

Hi Bob,

I am also having the same problem.

The first time that I tried to install I received the following
message:
"The instalation of this package failed"


After I did what you suggested receive the following message:
"Setup could not find any available products to install.
Please contact your system administrator"

Will it be that my download this cracked?

I am in await it...


DanielEtchells escreveu:

 

[msnigres]

Hi Bob,

I am also having the same problem.

The first time that I tried to install I received the following
message:
"The instalation of this package failed"


After I did what you suggested receive the following message:
"Setup could not find any available products to install.
Please contact your system administrator"

Will it be that my download this cracked?

I am in await it...


DanielEtchells escreveu:

 

[msnigres]

Hi Bob,

I am also having the same problem.

The first time that I tried to install I received the following
message:
"The instalation of this package failed"


After I did what you suggested receive the following message:
"Setup could not find any available products to install.
Please contact your system administrator"

Will it be that my download this cracked?

I am in await it...


DanielEtchells escreveu: