Office 2007 Installation

W

Will

I have tried downloading and installing Office 2007 beta 4 times now, I even
tried in safe mode and it always does the same thing; It downloads and starts
installing with no problems, then about 10-15% in it says it has encountered
a problem and could not be installed. HELP!

Many Thanks
 
B

Bob Buckland ?:-\)

Hi Will,

From Start=>Run type
%temp% {enter key}
and in the temp folder use the details view and look for the most recent Setup(xxxx).log file and see if it gives you any
information on what the issue is.

=========
I have tried downloading and installing Office 2007 beta 4 times now, I even
tried in safe mode and it always does the same thing; It downloads and starts
installing with no problems, then about 10-15% in it says it has encountered
a problem and could not be installed. HELP!

Many Thanks<<
 
B

Bob Buckland ?:-\)

Hi Will,

From Start=>Run type
%temp% {enter key}
and in the temp folder use the details view and look for the most recent Setup(xxxx).log file and see if it gives you any
information on what the issue is.

=========
I have tried downloading and installing Office 2007 beta 4 times now, I even
tried in safe mode and it always does the same thing; It downloads and starts
installing with no problems, then about 10-15% in it says it has encountered
a problem and could not be installed. HELP!

Many Thanks<<
 
B

Bob Buckland ?:-\)

Hi Will,

From Start=>Run type
%temp% {enter key}
and in the temp folder use the details view and look for the most recent Setup(xxxx).log file and see if it gives you any
information on what the issue is.

=========
I have tried downloading and installing Office 2007 beta 4 times now, I even
tried in safe mode and it always does the same thing; It downloads and starts
installing with no problems, then about 10-15% in it says it has encountered
a problem and could not be installed. HELP!

Many Thanks<<
 
B

Bob Buckland ?:-\)

Hi Will,

From Start=>Run type
%temp% {enter key}
and in the temp folder use the details view and look for the most recent Setup(xxxx).log file and see if it gives you any
information on what the issue is.

=========
I have tried downloading and installing Office 2007 beta 4 times now, I even
tried in safe mode and it always does the same thing; It downloads and starts
installing with no problems, then about 10-15% in it says it has encountered
a problem and could not be installed. HELP!

Many Thanks<<
 
B

Bob Buckland ?:-\)

Hi Will,

From Start=>Run type
%temp% {enter key}
and in the temp folder use the details view and look for the most recent Setup(xxxx).log file and see if it gives you any
information on what the issue is.

=========
I have tried downloading and installing Office 2007 beta 4 times now, I even
tried in safe mode and it always does the same thing; It downloads and starts
installing with no problems, then about 10-15% in it says it has encountered
a problem and could not be installed. HELP!

Many Thanks<<
 
B

Bob Buckland ?:-\)

Hi Will,

From Start=>Run type
%temp% {enter key}
and in the temp folder use the details view and look for the most recent Setup(xxxx).log file and see if it gives you any
information on what the issue is.

=========
I have tried downloading and installing Office 2007 beta 4 times now, I even
tried in safe mode and it always does the same thing; It downloads and starts
installing with no problems, then about 10-15% in it says it has encountered
a problem and could not be installed. HELP!

Many Thanks<<
 
B

Bob Buckland ?:-\)

Hi Will,

From Start=>Run type
%temp% {enter key}
and in the temp folder use the details view and look for the most recent Setup(xxxx).log file and see if it gives you any
information on what the issue is.

=========
I have tried downloading and installing Office 2007 beta 4 times now, I even
tried in safe mode and it always does the same thing; It downloads and starts
installing with no problems, then about 10-15% in it says it has encountered
a problem and could not be installed. HELP!

Many Thanks<<
 
B

Bob Buckland ?:-\)

Hi Will,

From Start=>Run type
%temp% {enter key}
and in the temp folder use the details view and look for the most recent Setup(xxxx).log file and see if it gives you any
information on what the issue is.

=========
I have tried downloading and installing Office 2007 beta 4 times now, I even
tried in safe mode and it always does the same thing; It downloads and starts
installing with no problems, then about 10-15% in it says it has encountered
a problem and could not be installed. HELP!

Many Thanks<<
 
A

Armie

I have the same issue. In my recent (and previous) logs; there is nothing
suspect until this portion, near the end of the log:
++++++++++
....
Executing chained package: AccessMUI.en-US
05/30/2006 21:56:51 Installing chained package: AccessMUI.en-US
Catalyst Package Install...
Package: AccessMUI.en-US
File: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
Command Line:
ADDLOCAL=AccessTemplatesIntl_1033,ACCESSNonBootFilesIntl_1033,Gimme_OnDemandData,AccessHelpFilesIntl_1033,CalendarControlIntl_1033,ACCESSFilesIntl_1033,MsoInstalledPackagesScopedIntl_1033,OSetupControllerIntl_1033,SetupXmlFiles
CULTURE="en-US" INSTALLLOCATION="C:\Program Files\Microsoft Office"
REMOVEPREVIOUS="ACCESSFiles,EXCELFiles,OUTLOOKFiles,PPTFiles,PubPrimary,WORDFiles,XDOCSFiles"
REMOVESAMEVERSION="" USERINITIALS="ATE" USERNAME="xxxxxx xxxxxxx"
WATSONSQM="AUTOREPORT" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1
SETUPEXEINSTALLUILANGUAGE=1033
SETUPINTLDLLDIRECTORY="D:\1New\OfficePro2007-Install\Office.en-us\"
ARPSYSTEMCOMPONENT=1
PERF: TickCount=2605203 Name=MsiPackage::Install Description=Calling
OMsiInstaller::InstallProduct for package file "C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI"
MSI(INITIALIZE): '(null)'
MSI(TERMINATE): '(null)'
Log level changed from: Standard to: Verbose
Error: Failed to install product: ErrorCode: 1601(0x641).
00000000:012d50c6
operator delete
operator delete
operator delete
operator delete
operator delete
operator delete
RunSetup
RunSetup
GetModuleFileNameA
Rolling back chain
05/30/2006 21:56:51 Rolling back package: AccessMUI.en-US
There appears to be no rollback work to do for package: AccessMUI.en-US
path: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
LIS: start uncaching for download "{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-006E-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-006E-0409-0000-0000000FF1CE}-C"
Stopping running ose
Showing completion dialog.
Reboot requested if needed.
Failed to open process 0 when searching for modules. Error code: 87.
Continuing to next process...
Failed to enumerate modules loaded for process: 4. Error code: 299.
Continuing to next process...
Failed to open process 748 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1108 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1244 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1500 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1516 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1764 when searching for modules. Error code: 5.
Continuing to next process...
No reboot is needed.
Catalyst execution finished: 05/30/2006 21:57:17. Return code: 1601.
Exception caught: ExceptionNotThrown.
PERF: TickCount=2630968 Name=RunSetup Description=End function
+++++++++++
END OF LOG FILE
+++++++++++

I serached for "Code 1601" on the forums, but could not find anything. I
tried again without installing Access, but same result (and same error in log
file!).

I am running Office 2003 (all apps closed when I try to install 2007) and
have tried Upgrade and Custom options with the same result. I have manually
extracted the OPPlus-EN.exe file and installed from than directory with the
same result. I'm about ready to give up getting this installed.

FWIW, the computer is a 2.8 GHz with 8.2 GBfree on the install partition and
23.6 GB free on the "install from" partition; I'm running WinXP Pro SP2, I
have 1 GB of RAM and no Page file. I have previously turned off and disabled
some WinXP services but have re-enabled and re-started anything that I think
could affect the install. Can anyone tell me what, if any, services the
install is dependent upon?

Thanks,
Armie
 
A

Armie

I have the same issue. In my recent (and previous) logs; there is nothing
suspect until this portion, near the end of the log:
++++++++++
....
Executing chained package: AccessMUI.en-US
05/30/2006 21:56:51 Installing chained package: AccessMUI.en-US
Catalyst Package Install...
Package: AccessMUI.en-US
File: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
Command Line:
ADDLOCAL=AccessTemplatesIntl_1033,ACCESSNonBootFilesIntl_1033,Gimme_OnDemandData,AccessHelpFilesIntl_1033,CalendarControlIntl_1033,ACCESSFilesIntl_1033,MsoInstalledPackagesScopedIntl_1033,OSetupControllerIntl_1033,SetupXmlFiles
CULTURE="en-US" INSTALLLOCATION="C:\Program Files\Microsoft Office"
REMOVEPREVIOUS="ACCESSFiles,EXCELFiles,OUTLOOKFiles,PPTFiles,PubPrimary,WORDFiles,XDOCSFiles"
REMOVESAMEVERSION="" USERINITIALS="ATE" USERNAME="xxxxxx xxxxxxx"
WATSONSQM="AUTOREPORT" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1
SETUPEXEINSTALLUILANGUAGE=1033
SETUPINTLDLLDIRECTORY="D:\1New\OfficePro2007-Install\Office.en-us\"
ARPSYSTEMCOMPONENT=1
PERF: TickCount=2605203 Name=MsiPackage::Install Description=Calling
OMsiInstaller::InstallProduct for package file "C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI"
MSI(INITIALIZE): '(null)'
MSI(TERMINATE): '(null)'
Log level changed from: Standard to: Verbose
Error: Failed to install product: ErrorCode: 1601(0x641).
00000000:012d50c6
operator delete
operator delete
operator delete
operator delete
operator delete
operator delete
RunSetup
RunSetup
GetModuleFileNameA
Rolling back chain
05/30/2006 21:56:51 Rolling back package: AccessMUI.en-US
There appears to be no rollback work to do for package: AccessMUI.en-US
path: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
LIS: start uncaching for download "{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-006E-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-006E-0409-0000-0000000FF1CE}-C"
Stopping running ose
Showing completion dialog.
Reboot requested if needed.
Failed to open process 0 when searching for modules. Error code: 87.
Continuing to next process...
Failed to enumerate modules loaded for process: 4. Error code: 299.
Continuing to next process...
Failed to open process 748 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1108 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1244 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1500 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1516 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1764 when searching for modules. Error code: 5.
Continuing to next process...
No reboot is needed.
Catalyst execution finished: 05/30/2006 21:57:17. Return code: 1601.
Exception caught: ExceptionNotThrown.
PERF: TickCount=2630968 Name=RunSetup Description=End function
+++++++++++
END OF LOG FILE
+++++++++++

I serached for "Code 1601" on the forums, but could not find anything. I
tried again without installing Access, but same result (and same error in log
file!).

I am running Office 2003 (all apps closed when I try to install 2007) and
have tried Upgrade and Custom options with the same result. I have manually
extracted the OPPlus-EN.exe file and installed from than directory with the
same result. I'm about ready to give up getting this installed.

FWIW, the computer is a 2.8 GHz with 8.2 GBfree on the install partition and
23.6 GB free on the "install from" partition; I'm running WinXP Pro SP2, I
have 1 GB of RAM and no Page file. I have previously turned off and disabled
some WinXP services but have re-enabled and re-started anything that I think
could affect the install. Can anyone tell me what, if any, services the
install is dependent upon?

Thanks,
Armie
 
A

Armie

I have the same issue. In my recent (and previous) logs; there is nothing
suspect until this portion, near the end of the log:
++++++++++
....
Executing chained package: AccessMUI.en-US
05/30/2006 21:56:51 Installing chained package: AccessMUI.en-US
Catalyst Package Install...
Package: AccessMUI.en-US
File: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
Command Line:
ADDLOCAL=AccessTemplatesIntl_1033,ACCESSNonBootFilesIntl_1033,Gimme_OnDemandData,AccessHelpFilesIntl_1033,CalendarControlIntl_1033,ACCESSFilesIntl_1033,MsoInstalledPackagesScopedIntl_1033,OSetupControllerIntl_1033,SetupXmlFiles
CULTURE="en-US" INSTALLLOCATION="C:\Program Files\Microsoft Office"
REMOVEPREVIOUS="ACCESSFiles,EXCELFiles,OUTLOOKFiles,PPTFiles,PubPrimary,WORDFiles,XDOCSFiles"
REMOVESAMEVERSION="" USERINITIALS="ATE" USERNAME="xxxxxx xxxxxxx"
WATSONSQM="AUTOREPORT" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1
SETUPEXEINSTALLUILANGUAGE=1033
SETUPINTLDLLDIRECTORY="D:\1New\OfficePro2007-Install\Office.en-us\"
ARPSYSTEMCOMPONENT=1
PERF: TickCount=2605203 Name=MsiPackage::Install Description=Calling
OMsiInstaller::InstallProduct for package file "C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI"
MSI(INITIALIZE): '(null)'
MSI(TERMINATE): '(null)'
Log level changed from: Standard to: Verbose
Error: Failed to install product: ErrorCode: 1601(0x641).
00000000:012d50c6
operator delete
operator delete
operator delete
operator delete
operator delete
operator delete
RunSetup
RunSetup
GetModuleFileNameA
Rolling back chain
05/30/2006 21:56:51 Rolling back package: AccessMUI.en-US
There appears to be no rollback work to do for package: AccessMUI.en-US
path: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
LIS: start uncaching for download "{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-006E-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-006E-0409-0000-0000000FF1CE}-C"
Stopping running ose
Showing completion dialog.
Reboot requested if needed.
Failed to open process 0 when searching for modules. Error code: 87.
Continuing to next process...
Failed to enumerate modules loaded for process: 4. Error code: 299.
Continuing to next process...
Failed to open process 748 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1108 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1244 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1500 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1516 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1764 when searching for modules. Error code: 5.
Continuing to next process...
No reboot is needed.
Catalyst execution finished: 05/30/2006 21:57:17. Return code: 1601.
Exception caught: ExceptionNotThrown.
PERF: TickCount=2630968 Name=RunSetup Description=End function
+++++++++++
END OF LOG FILE
+++++++++++

I serached for "Code 1601" on the forums, but could not find anything. I
tried again without installing Access, but same result (and same error in log
file!).

I am running Office 2003 (all apps closed when I try to install 2007) and
have tried Upgrade and Custom options with the same result. I have manually
extracted the OPPlus-EN.exe file and installed from than directory with the
same result. I'm about ready to give up getting this installed.

FWIW, the computer is a 2.8 GHz with 8.2 GBfree on the install partition and
23.6 GB free on the "install from" partition; I'm running WinXP Pro SP2, I
have 1 GB of RAM and no Page file. I have previously turned off and disabled
some WinXP services but have re-enabled and re-started anything that I think
could affect the install. Can anyone tell me what, if any, services the
install is dependent upon?

Thanks,
Armie
 
A

Armie

I have the same issue. In my recent (and previous) logs; there is nothing
suspect until this portion, near the end of the log:
++++++++++
....
Executing chained package: AccessMUI.en-US
05/30/2006 21:56:51 Installing chained package: AccessMUI.en-US
Catalyst Package Install...
Package: AccessMUI.en-US
File: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
Command Line:
ADDLOCAL=AccessTemplatesIntl_1033,ACCESSNonBootFilesIntl_1033,Gimme_OnDemandData,AccessHelpFilesIntl_1033,CalendarControlIntl_1033,ACCESSFilesIntl_1033,MsoInstalledPackagesScopedIntl_1033,OSetupControllerIntl_1033,SetupXmlFiles
CULTURE="en-US" INSTALLLOCATION="C:\Program Files\Microsoft Office"
REMOVEPREVIOUS="ACCESSFiles,EXCELFiles,OUTLOOKFiles,PPTFiles,PubPrimary,WORDFiles,XDOCSFiles"
REMOVESAMEVERSION="" USERINITIALS="ATE" USERNAME="xxxxxx xxxxxxx"
WATSONSQM="AUTOREPORT" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1
SETUPEXEINSTALLUILANGUAGE=1033
SETUPINTLDLLDIRECTORY="D:\1New\OfficePro2007-Install\Office.en-us\"
ARPSYSTEMCOMPONENT=1
PERF: TickCount=2605203 Name=MsiPackage::Install Description=Calling
OMsiInstaller::InstallProduct for package file "C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI"
MSI(INITIALIZE): '(null)'
MSI(TERMINATE): '(null)'
Log level changed from: Standard to: Verbose
Error: Failed to install product: ErrorCode: 1601(0x641).
00000000:012d50c6
operator delete
operator delete
operator delete
operator delete
operator delete
operator delete
RunSetup
RunSetup
GetModuleFileNameA
Rolling back chain
05/30/2006 21:56:51 Rolling back package: AccessMUI.en-US
There appears to be no rollback work to do for package: AccessMUI.en-US
path: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
LIS: start uncaching for download "{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-006E-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-006E-0409-0000-0000000FF1CE}-C"
Stopping running ose
Showing completion dialog.
Reboot requested if needed.
Failed to open process 0 when searching for modules. Error code: 87.
Continuing to next process...
Failed to enumerate modules loaded for process: 4. Error code: 299.
Continuing to next process...
Failed to open process 748 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1108 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1244 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1500 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1516 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1764 when searching for modules. Error code: 5.
Continuing to next process...
No reboot is needed.
Catalyst execution finished: 05/30/2006 21:57:17. Return code: 1601.
Exception caught: ExceptionNotThrown.
PERF: TickCount=2630968 Name=RunSetup Description=End function
+++++++++++
END OF LOG FILE
+++++++++++

I serached for "Code 1601" on the forums, but could not find anything. I
tried again without installing Access, but same result (and same error in log
file!).

I am running Office 2003 (all apps closed when I try to install 2007) and
have tried Upgrade and Custom options with the same result. I have manually
extracted the OPPlus-EN.exe file and installed from than directory with the
same result. I'm about ready to give up getting this installed.

FWIW, the computer is a 2.8 GHz with 8.2 GBfree on the install partition and
23.6 GB free on the "install from" partition; I'm running WinXP Pro SP2, I
have 1 GB of RAM and no Page file. I have previously turned off and disabled
some WinXP services but have re-enabled and re-started anything that I think
could affect the install. Can anyone tell me what, if any, services the
install is dependent upon?

Thanks,
Armie
 
A

Armie

I have the same issue. In my recent (and previous) logs; there is nothing
suspect until this portion, near the end of the log:
++++++++++
....
Executing chained package: AccessMUI.en-US
05/30/2006 21:56:51 Installing chained package: AccessMUI.en-US
Catalyst Package Install...
Package: AccessMUI.en-US
File: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
Command Line:
ADDLOCAL=AccessTemplatesIntl_1033,ACCESSNonBootFilesIntl_1033,Gimme_OnDemandData,AccessHelpFilesIntl_1033,CalendarControlIntl_1033,ACCESSFilesIntl_1033,MsoInstalledPackagesScopedIntl_1033,OSetupControllerIntl_1033,SetupXmlFiles
CULTURE="en-US" INSTALLLOCATION="C:\Program Files\Microsoft Office"
REMOVEPREVIOUS="ACCESSFiles,EXCELFiles,OUTLOOKFiles,PPTFiles,PubPrimary,WORDFiles,XDOCSFiles"
REMOVESAMEVERSION="" USERINITIALS="ATE" USERNAME="xxxxxx xxxxxxx"
WATSONSQM="AUTOREPORT" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1
SETUPEXEINSTALLUILANGUAGE=1033
SETUPINTLDLLDIRECTORY="D:\1New\OfficePro2007-Install\Office.en-us\"
ARPSYSTEMCOMPONENT=1
PERF: TickCount=2605203 Name=MsiPackage::Install Description=Calling
OMsiInstaller::InstallProduct for package file "C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI"
MSI(INITIALIZE): '(null)'
MSI(TERMINATE): '(null)'
Log level changed from: Standard to: Verbose
Error: Failed to install product: ErrorCode: 1601(0x641).
00000000:012d50c6
operator delete
operator delete
operator delete
operator delete
operator delete
operator delete
RunSetup
RunSetup
GetModuleFileNameA
Rolling back chain
05/30/2006 21:56:51 Rolling back package: AccessMUI.en-US
There appears to be no rollback work to do for package: AccessMUI.en-US
path: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
LIS: start uncaching for download "{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-006E-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-006E-0409-0000-0000000FF1CE}-C"
Stopping running ose
Showing completion dialog.
Reboot requested if needed.
Failed to open process 0 when searching for modules. Error code: 87.
Continuing to next process...
Failed to enumerate modules loaded for process: 4. Error code: 299.
Continuing to next process...
Failed to open process 748 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1108 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1244 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1500 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1516 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1764 when searching for modules. Error code: 5.
Continuing to next process...
No reboot is needed.
Catalyst execution finished: 05/30/2006 21:57:17. Return code: 1601.
Exception caught: ExceptionNotThrown.
PERF: TickCount=2630968 Name=RunSetup Description=End function
+++++++++++
END OF LOG FILE
+++++++++++

I serached for "Code 1601" on the forums, but could not find anything. I
tried again without installing Access, but same result (and same error in log
file!).

I am running Office 2003 (all apps closed when I try to install 2007) and
have tried Upgrade and Custom options with the same result. I have manually
extracted the OPPlus-EN.exe file and installed from than directory with the
same result. I'm about ready to give up getting this installed.

FWIW, the computer is a 2.8 GHz with 8.2 GBfree on the install partition and
23.6 GB free on the "install from" partition; I'm running WinXP Pro SP2, I
have 1 GB of RAM and no Page file. I have previously turned off and disabled
some WinXP services but have re-enabled and re-started anything that I think
could affect the install. Can anyone tell me what, if any, services the
install is dependent upon?

Thanks,
Armie
 
A

Armie

I have the same issue. In my recent (and previous) logs; there is nothing
suspect until this portion, near the end of the log:
++++++++++
....
Executing chained package: AccessMUI.en-US
05/30/2006 21:56:51 Installing chained package: AccessMUI.en-US
Catalyst Package Install...
Package: AccessMUI.en-US
File: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
Command Line:
ADDLOCAL=AccessTemplatesIntl_1033,ACCESSNonBootFilesIntl_1033,Gimme_OnDemandData,AccessHelpFilesIntl_1033,CalendarControlIntl_1033,ACCESSFilesIntl_1033,MsoInstalledPackagesScopedIntl_1033,OSetupControllerIntl_1033,SetupXmlFiles
CULTURE="en-US" INSTALLLOCATION="C:\Program Files\Microsoft Office"
REMOVEPREVIOUS="ACCESSFiles,EXCELFiles,OUTLOOKFiles,PPTFiles,PubPrimary,WORDFiles,XDOCSFiles"
REMOVESAMEVERSION="" USERINITIALS="ATE" USERNAME="xxxxxx xxxxxxx"
WATSONSQM="AUTOREPORT" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1
SETUPEXEINSTALLUILANGUAGE=1033
SETUPINTLDLLDIRECTORY="D:\1New\OfficePro2007-Install\Office.en-us\"
ARPSYSTEMCOMPONENT=1
PERF: TickCount=2605203 Name=MsiPackage::Install Description=Calling
OMsiInstaller::InstallProduct for package file "C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI"
MSI(INITIALIZE): '(null)'
MSI(TERMINATE): '(null)'
Log level changed from: Standard to: Verbose
Error: Failed to install product: ErrorCode: 1601(0x641).
00000000:012d50c6
operator delete
operator delete
operator delete
operator delete
operator delete
operator delete
RunSetup
RunSetup
GetModuleFileNameA
Rolling back chain
05/30/2006 21:56:51 Rolling back package: AccessMUI.en-US
There appears to be no rollback work to do for package: AccessMUI.en-US
path: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
LIS: start uncaching for download "{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-006E-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-006E-0409-0000-0000000FF1CE}-C"
Stopping running ose
Showing completion dialog.
Reboot requested if needed.
Failed to open process 0 when searching for modules. Error code: 87.
Continuing to next process...
Failed to enumerate modules loaded for process: 4. Error code: 299.
Continuing to next process...
Failed to open process 748 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1108 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1244 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1500 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1516 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1764 when searching for modules. Error code: 5.
Continuing to next process...
No reboot is needed.
Catalyst execution finished: 05/30/2006 21:57:17. Return code: 1601.
Exception caught: ExceptionNotThrown.
PERF: TickCount=2630968 Name=RunSetup Description=End function
+++++++++++
END OF LOG FILE
+++++++++++

I serached for "Code 1601" on the forums, but could not find anything. I
tried again without installing Access, but same result (and same error in log
file!).

I am running Office 2003 (all apps closed when I try to install 2007) and
have tried Upgrade and Custom options with the same result. I have manually
extracted the OPPlus-EN.exe file and installed from than directory with the
same result. I'm about ready to give up getting this installed.

FWIW, the computer is a 2.8 GHz with 8.2 GBfree on the install partition and
23.6 GB free on the "install from" partition; I'm running WinXP Pro SP2, I
have 1 GB of RAM and no Page file. I have previously turned off and disabled
some WinXP services but have re-enabled and re-started anything that I think
could affect the install. Can anyone tell me what, if any, services the
install is dependent upon?

Thanks,
Armie
 
A

Armie

I have the same issue. In my recent (and previous) logs; there is nothing
suspect until this portion, near the end of the log:
++++++++++
....
Executing chained package: AccessMUI.en-US
05/30/2006 21:56:51 Installing chained package: AccessMUI.en-US
Catalyst Package Install...
Package: AccessMUI.en-US
File: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
Command Line:
ADDLOCAL=AccessTemplatesIntl_1033,ACCESSNonBootFilesIntl_1033,Gimme_OnDemandData,AccessHelpFilesIntl_1033,CalendarControlIntl_1033,ACCESSFilesIntl_1033,MsoInstalledPackagesScopedIntl_1033,OSetupControllerIntl_1033,SetupXmlFiles
CULTURE="en-US" INSTALLLOCATION="C:\Program Files\Microsoft Office"
REMOVEPREVIOUS="ACCESSFiles,EXCELFiles,OUTLOOKFiles,PPTFiles,PubPrimary,WORDFiles,XDOCSFiles"
REMOVESAMEVERSION="" USERINITIALS="ATE" USERNAME="xxxxxx xxxxxxx"
WATSONSQM="AUTOREPORT" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1
SETUPEXEINSTALLUILANGUAGE=1033
SETUPINTLDLLDIRECTORY="D:\1New\OfficePro2007-Install\Office.en-us\"
ARPSYSTEMCOMPONENT=1
PERF: TickCount=2605203 Name=MsiPackage::Install Description=Calling
OMsiInstaller::InstallProduct for package file "C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI"
MSI(INITIALIZE): '(null)'
MSI(TERMINATE): '(null)'
Log level changed from: Standard to: Verbose
Error: Failed to install product: ErrorCode: 1601(0x641).
00000000:012d50c6
operator delete
operator delete
operator delete
operator delete
operator delete
operator delete
RunSetup
RunSetup
GetModuleFileNameA
Rolling back chain
05/30/2006 21:56:51 Rolling back package: AccessMUI.en-US
There appears to be no rollback work to do for package: AccessMUI.en-US
path: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
LIS: start uncaching for download "{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-006E-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-006E-0409-0000-0000000FF1CE}-C"
Stopping running ose
Showing completion dialog.
Reboot requested if needed.
Failed to open process 0 when searching for modules. Error code: 87.
Continuing to next process...
Failed to enumerate modules loaded for process: 4. Error code: 299.
Continuing to next process...
Failed to open process 748 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1108 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1244 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1500 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1516 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1764 when searching for modules. Error code: 5.
Continuing to next process...
No reboot is needed.
Catalyst execution finished: 05/30/2006 21:57:17. Return code: 1601.
Exception caught: ExceptionNotThrown.
PERF: TickCount=2630968 Name=RunSetup Description=End function
+++++++++++
END OF LOG FILE
+++++++++++

I serached for "Code 1601" on the forums, but could not find anything. I
tried again without installing Access, but same result (and same error in log
file!).

I am running Office 2003 (all apps closed when I try to install 2007) and
have tried Upgrade and Custom options with the same result. I have manually
extracted the OPPlus-EN.exe file and installed from than directory with the
same result. I'm about ready to give up getting this installed.

FWIW, the computer is a 2.8 GHz with 8.2 GBfree on the install partition and
23.6 GB free on the "install from" partition; I'm running WinXP Pro SP2, I
have 1 GB of RAM and no Page file. I have previously turned off and disabled
some WinXP services but have re-enabled and re-started anything that I think
could affect the install. Can anyone tell me what, if any, services the
install is dependent upon?

Thanks,
Armie
 
A

Armie

I have the same issue. In my recent (and previous) logs; there is nothing
suspect until this portion, near the end of the log:
++++++++++
....
Executing chained package: AccessMUI.en-US
05/30/2006 21:56:51 Installing chained package: AccessMUI.en-US
Catalyst Package Install...
Package: AccessMUI.en-US
File: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
Command Line:
ADDLOCAL=AccessTemplatesIntl_1033,ACCESSNonBootFilesIntl_1033,Gimme_OnDemandData,AccessHelpFilesIntl_1033,CalendarControlIntl_1033,ACCESSFilesIntl_1033,MsoInstalledPackagesScopedIntl_1033,OSetupControllerIntl_1033,SetupXmlFiles
CULTURE="en-US" INSTALLLOCATION="C:\Program Files\Microsoft Office"
REMOVEPREVIOUS="ACCESSFiles,EXCELFiles,OUTLOOKFiles,PPTFiles,PubPrimary,WORDFiles,XDOCSFiles"
REMOVESAMEVERSION="" USERINITIALS="ATE" USERNAME="xxxxxx xxxxxxx"
WATSONSQM="AUTOREPORT" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1
SETUPEXEINSTALLUILANGUAGE=1033
SETUPINTLDLLDIRECTORY="D:\1New\OfficePro2007-Install\Office.en-us\"
ARPSYSTEMCOMPONENT=1
PERF: TickCount=2605203 Name=MsiPackage::Install Description=Calling
OMsiInstaller::InstallProduct for package file "C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI"
MSI(INITIALIZE): '(null)'
MSI(TERMINATE): '(null)'
Log level changed from: Standard to: Verbose
Error: Failed to install product: ErrorCode: 1601(0x641).
00000000:012d50c6
operator delete
operator delete
operator delete
operator delete
operator delete
operator delete
RunSetup
RunSetup
GetModuleFileNameA
Rolling back chain
05/30/2006 21:56:51 Rolling back package: AccessMUI.en-US
There appears to be no rollback work to do for package: AccessMUI.en-US
path: C:\MSOCache\All
Users\{30120000-0015-0409-0000-0000000FF1CE}-C\AccessMUI.MSI
LIS: start uncaching for download "{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0011-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0015-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0016-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0018-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0019-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001A-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-001B-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-0044-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{30120000-006E-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download
"{30120000-006E-0409-0000-0000000FF1CE}-C"
Stopping running ose
Showing completion dialog.
Reboot requested if needed.
Failed to open process 0 when searching for modules. Error code: 87.
Continuing to next process...
Failed to enumerate modules loaded for process: 4. Error code: 299.
Continuing to next process...
Failed to open process 748 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1108 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1244 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1500 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1516 when searching for modules. Error code: 5.
Continuing to next process...
Failed to open process 1764 when searching for modules. Error code: 5.
Continuing to next process...
No reboot is needed.
Catalyst execution finished: 05/30/2006 21:57:17. Return code: 1601.
Exception caught: ExceptionNotThrown.
PERF: TickCount=2630968 Name=RunSetup Description=End function
+++++++++++
END OF LOG FILE
+++++++++++

I serached for "Code 1601" on the forums, but could not find anything. I
tried again without installing Access, but same result (and same error in log
file!).

I am running Office 2003 (all apps closed when I try to install 2007) and
have tried Upgrade and Custom options with the same result. I have manually
extracted the OPPlus-EN.exe file and installed from than directory with the
same result. I'm about ready to give up getting this installed.

FWIW, the computer is a 2.8 GHz with 8.2 GBfree on the install partition and
23.6 GB free on the "install from" partition; I'm running WinXP Pro SP2, I
have 1 GB of RAM and no Page file. I have previously turned off and disabled
some WinXP services but have re-enabled and re-started anything that I think
could affect the install. Can anyone tell me what, if any, services the
install is dependent upon?

Thanks,
Armie
 
K

kpwood

I have also had trouble installing 2007 on my laptop, running Vista BETA.
Installed and runs fine along side my 2003 install on my XP desktop box
though.
 
K

kpwood

I have also had trouble installing 2007 on my laptop, running Vista BETA.
Installed and runs fine along side my 2003 install on my XP desktop box
though.
 
K

kpwood

I have also had trouble installing 2007 on my laptop, running Vista BETA.
Installed and runs fine along side my 2003 install on my XP desktop box
though.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

I can create Publisher documents, but I can not open / read them. 0
Visio Utilizing 100% Memory - Troubleshooting 0
Re: Install error, cannot find ProPlus.WW\ProPLSWW.cab 0
Outlook Desktop (latest) stopped syncing IMAP accpounts from selfowned Mail server. 0
Having trouble installing Office enterprise 2007, on a windows 8.1 OS 0
Can someone provide me with info on how Office 365 works? 2
A couple questions BEFORE using Office 365 0
Problems with office 2016 installation. 0

Top