Home publishing 2000 support

[Sunairwater]

Everytime I try and install Home Publishing 2000.....it goes half the way of
the installation and then asks to "Install set up disk". I have already
installed the product into one of my home computer and it installed fine. My
computer has Win XP home and have already checked with the Disk and it does
not show any abrasions. Do not know why it is behaving such....help.

 

[Mary Sauer]

Homepub 2K: How to Install Programs Manually
http://support.microsoft.com/default.aspx?scid=kb;en-us;246578

 

[John Inzer]

Is this the three disk stand alone version
of HP2000 or the version that is included
with MS Works Suite 2000?

What is the complete error?

More than likely, you have a dirty or
damaged install disk.

Things to try:

1) Clean the disk/s with warm water and
mild soap. Dry gently with a soft cloth...
wiping from center to edge (not in circles).

2) If you have more than one optical disk
drive on your computer try installing from
each one.

3) Copy the disk/s and install from the
copies.

4) Install the complete program to your
hard drive. (This is explained in a readme
file on disk one).

Before installing, close all programs that
are running...especially virus scanners.

In the future, please direct your HP2000
questions to one of the following newsgroups:

Home Publishing
http://tinyurl.com/2geuz

Picture It!
http://tinyurl.com/iozo

 

[Sunairwater]

I am sorry ticked off Miss Tick....I am going to get a Publisher 2003
installed quick enough....Thank you for your help...but microsoft does not
have a support for the Home Publishing product.

 

[John Inzer]

snip<
microsoft does not have a support
for the Home Publishing product.

===========================
Yes they do...did you read my
reply to your message of 06-30?

Is this the three disk stand alone version
of HP2000 or the version that is included
with MS Works Suite 2000?

What is the complete error?

More than likely, you have a dirty or
damaged install disk.

Things to try:

1) Clean the disk/s with warm water and
mild soap. Dry gently with a soft cloth...
wiping from center to edge (not in circles).

2) If you have more than one optical disk
drive on your computer try installing from
each one.

3) Copy the disk/s and install from the
copies.

4) Install the complete program to your
hard drive. (This is explained in a readme
file on disk one).

Before installing, close all programs that
are running...especially virus scanners.

In the future, please direct your HP2000
questions to one of the following newsgroups:

Home Publishing
http://tinyurl.com/2geuz

Picture It!
http://tinyurl.com/iozo

 

[Mike]

I receive the following Error Message when trying to load Microsoft Home
publishing 2000. Error 1606 could not access network location C:gram
files\common files\microsoft shared\works shared\1033. I am using windows
XP. Before the latest security updates the program was working fine. I am
also unable to completely uninstall the program. So this error message crops
up whenever my system is booted.

Thanks
Mike

 

[JoAnn Paules [MSFT MVP]]

Wrong newsgroup. This is for Publisher, not Home Publishing.

 

[Mike]

Other posts concerning Home Publisher 2000 were in this newsgroup. Which
newsgroup contains Home Publishing please point me in the right direction.
As all I am trying to do is have Home Publishing work properly or just
completely unintall the program.

Thanks
Mike

 

[JoAnn Paules [MSFT MVP]]

You need the microsoft.public.home.publishing

There are posts here for Publisher, not Home Publishing. Well, there are a
few posts that were mistakenly posted her but HP has it's own newsgroup.
Publisher is a different program with an unfortunately similar name.

 

[Mike]

Thank you.

Mike

You need the microsoft.public.home.publishing

There are posts here for Publisher, not Home Publishing. Well, there are a
few posts that were mistakenly posted her but HP has it's own newsgroup.
Publisher is a different program with an unfortunately similar name.

--

JoAnn Paules
MVP Microsoft [Publisher]

Other posts concerning Home Publisher 2000 were in this newsgroup. Which
newsgroup contains Home Publishing please point me in the right direction.
As all I am trying to do is have Home Publishing work properly or just
completely unintall the program.

Thanks
Mike

 

[Mike]

Tried looking for the site. I would greatly appreciate it if you could send
me the link.

Tha nks again for all of your help.

Thanks
Mike

You need the microsoft.public.home.publishing

There are posts here for Publisher, not Home Publishing. Well, there are a
few posts that were mistakenly posted her but HP has it's own newsgroup.
Publisher is a different program with an unfortunately similar name.

--

JoAnn Paules
MVP Microsoft [Publisher]

Other posts concerning Home Publisher 2000 were in this newsgroup. Which
newsgroup contains Home Publishing please point me in the right direction.
As all I am trying to do is have Home Publishing work properly or just
completely unintall the program.

Thanks
Mike

 

[Mary Sauer]

Setup the Microsoft newsgroups in your newsreader:
news://msnews.microsoft.com/microsoft.public.home.publishing

"Error 1606. Could not access network location <common administrative tools>. All
users\" error message when you install a program
http://support.microsoft.com/default.aspx?scid=kb;en-us;315352

--
Mary Sauer MSFT MVP
http://office.microsoft.com/

Tried looking for the site. I would greatly appreciate it if you could send
me the link.

Tha nks again for all of your help.

Thanks
Mike

You need the microsoft.public.home.publishing

There are posts here for Publisher, not Home Publishing. Well, there are a
few posts that were mistakenly posted her but HP has it's own newsgroup.
Publisher is a different program with an unfortunately similar name.

--

JoAnn Paules
MVP Microsoft [Publisher]

Other posts concerning Home Publisher 2000 were in this newsgroup. Which
newsgroup contains Home Publishing please point me in the right direction.
As all I am trying to do is have Home Publishing work properly or just
completely unintall the program.

Thanks
Mike

:

I receive the following Error Message when trying to load Microsoft Home
publishing 2000. Error 1606 could not access network location C:gram
files\common files\microsoft shared\works shared\1033. I am using
windows
XP. Before the latest security updates the program was working fine. I
am
also unable to completely uninstall the program. So this error message
crops
up whenever my system is booted.

Thanks
Mike

:

Everytime I try and install Home Publishing 2000.....it goes half the
way of
the installation and then asks to "Install set up disk". I have already
installed the product into one of my home computer and it installed
fine. My
computer has Win XP home and have already checked with the Disk and it
does
not show any abrasions. Do not know why it is behaving such....help.

 

[Mike]

Mary,

I appreciate the help will try this and hopefully this works.

Thanks
Mike

Setup the Microsoft newsgroups in your newsreader:
news://msnews.microsoft.com/microsoft.public.home.publishing

"Error 1606. Could not access network location <common administrative tools>. All
users\" error message when you install a program
http://support.microsoft.com/default.aspx?scid=kb;en-us;315352

--
Mary Sauer MSFT MVP
http://office.microsoft.com/
http://msauer.mvps.org/
news://msnews.microsoft.com

Tried looking for the site. I would greatly appreciate it if you could send
me the link.

Tha nks again for all of your help.

Thanks
Mike

You need the microsoft.public.home.publishing

There are posts here for Publisher, not Home Publishing. Well, there are a
few posts that were mistakenly posted her but HP has it's own newsgroup.
Publisher is a different program with an unfortunately similar name.

--

JoAnn Paules
MVP Microsoft [Publisher]



Other posts concerning Home Publisher 2000 were in this newsgroup. Which
newsgroup contains Home Publishing please point me in the right direction.
As all I am trying to do is have Home Publishing work properly or just
completely unintall the program.

Thanks
Mike

:

I receive the following Error Message when trying to load Microsoft Home
publishing 2000. Error 1606 could not access network location C:gram
files\common files\microsoft shared\works shared\1033. I am using
windows
XP. Before the latest security updates the program was working fine. I
am
also unable to completely uninstall the program. So this error message
crops
up whenever my system is booted.

Thanks
Mike

:

Everytime I try and install Home Publishing 2000.....it goes half the
way of
the installation and then asks to "Install set up disk". I have already
installed the product into one of my home computer and it installed
fine. My
computer has Win XP home and have already checked with the Disk and it
does
not show any abrasions. Do not know why it is behaving such....help.