Sending from an Additional Mailbox in Outlook

K

Kevin

Not sure if this is outlook or exchange. I have added various mailboxes to
Open Additional Mailbox. I have done this so that my users in the CSR
department can have their own emails open (nameATmydomain.com) as well as be
able to monitor salesATmydomain.com, informationATmydomain.com, etc. The
problem is when they reply to a message in these additional mailboxes, the
get an error:

Your message did not reach some or all of the intended recipients.

Subject: RE: gjh
Sent: 2/9/2007 9:26 AM

The following recipient(s) could not be reached:

A User on 2/9/2007 9:29 AM
You do not have permission to send to this recipient. For
assistance, contact your system administrator.
MSEXCH:MSExchangeIS:/DC=com/DC=mydomain:MYSERVER

How can I enable these users to send as this recipient? THe issue is when I
reply to the message in the additional mailbox, there is a FROM field and the
email (salesATmydomain.com) is in the from field. That is when this error
occurs. I have given the users FULL MAILBOX ACCESS rights in AD.

Thanks for the help.
 
R

Roady [MVP]

You must enable the Send As security permission on the AD object as well. If
you don't see the tab enable the Advanced View.
 
K

Kevin

Roady said:
You must enable the Send As security permission on the AD object as well. If
you don't see the tab enable the Advanced View.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003


-----
Kevin said:
Not sure if this is outlook or exchange. I have added various mailboxes to
Open Additional Mailbox. I have done this so that my users in the CSR
department can have their own emails open (nameATmydomain.com) as well as
be
able to monitor salesATmydomain.com, informationATmydomain.com, etc. The
problem is when they reply to a message in these additional mailboxes, the
get an error:

Your message did not reach some or all of the intended recipients.

Subject: RE: gjh
Sent: 2/9/2007 9:26 AM

The following recipient(s) could not be reached:

A User on 2/9/2007 9:29 AM
You do not have permission to send to this recipient. For
assistance, contact your system administrator.
MSEXCH:MSExchangeIS:/DC=com/DC=mydomain:MYSERVER

How can I enable these users to send as this recipient? THe issue is when
I
reply to the message in the additional mailbox, there is a FROM field and
the
email (salesATmydomain.com) is in the from field. That is when this error
occurs. I have given the users FULL MAILBOX ACCESS rights in AD.

Thanks for the help.

Where do I find that? I do not see the tab or how to go to Advanced View.
Thanks very much for your help.
 
R

Roady [MVP]

In AD U&C you can set the amount of details you see. If you open a user
object and don't see the Security tab you have it set to not show all
details.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003


-----
Kevin said:
Roady said:
You must enable the Send As security permission on the AD object as well.
If
you don't see the tab enable the Advanced View.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003


-----
Kevin said:
Not sure if this is outlook or exchange. I have added various mailboxes
to
Open Additional Mailbox. I have done this so that my users in the CSR
department can have their own emails open (nameATmydomain.com) as well
as
be
able to monitor salesATmydomain.com, informationATmydomain.com, etc.
The
problem is when they reply to a message in these additional mailboxes,
the
get an error:

Your message did not reach some or all of the intended recipients.

Subject: RE: gjh
Sent: 2/9/2007 9:26 AM

The following recipient(s) could not be reached:

A User on 2/9/2007 9:29 AM
You do not have permission to send to this recipient. For
assistance, contact your system administrator.
MSEXCH:MSExchangeIS:/DC=com/DC=mydomain:MYSERVER

How can I enable these users to send as this recipient? THe issue is
when
I
reply to the message in the additional mailbox, there is a FROM field
and
the
email (salesATmydomain.com) is in the from field. That is when this
error
occurs. I have given the users FULL MAILBOX ACCESS rights in AD.

Thanks for the help.

Where do I find that? I do not see the tab or how to go to Advanced View.
Thanks very much for your help.
 
K

Kevin

Roady said:
In AD U&C you can set the amount of details you see. If you open a user
object and don't see the Security tab you have it set to not show all
details.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003


-----
Kevin said:
Roady said:
You must enable the Send As security permission on the AD object as well.
If
you don't see the tab enable the Advanced View.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003
http://www.howto-outlook.com/
Outlook FAQ, HowTo, Downloads, Add-Ins and more

-----

Not sure if this is outlook or exchange. I have added various mailboxes
to
Open Additional Mailbox. I have done this so that my users in the CSR
department can have their own emails open (nameATmydomain.com) as well
as
be
able to monitor salesATmydomain.com, informationATmydomain.com, etc.
The
problem is when they reply to a message in these additional mailboxes,
the
get an error:

Your message did not reach some or all of the intended recipients.

Subject: RE: gjh
Sent: 2/9/2007 9:26 AM

The following recipient(s) could not be reached:

A User on 2/9/2007 9:29 AM
You do not have permission to send to this recipient. For
assistance, contact your system administrator.
MSEXCH:MSExchangeIS:/DC=com/DC=mydomain:MYSERVER

How can I enable these users to send as this recipient? THe issue is
when
I
reply to the message in the additional mailbox, there is a FROM field
and
the
email (salesATmydomain.com) is in the from field. That is when this
error
occurs. I have given the users FULL MAILBOX ACCESS rights in AD.

Thanks for the help.

Where do I find that? I do not see the tab or how to go to Advanced View.
Thanks very much for your help.

Where do I find this? It is not showing up and I cannot seem to find how to
make it show up.

THanks.
 
K

Kevin

Roady said:
In AD U&C you can set the amount of details you see. If you open a user
object and don't see the Security tab you have it set to not show all
details.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003


-----
Kevin said:
Roady said:
You must enable the Send As security permission on the AD object as well.
If
you don't see the tab enable the Advanced View.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003
http://www.howto-outlook.com/
Outlook FAQ, HowTo, Downloads, Add-Ins and more

-----

Not sure if this is outlook or exchange. I have added various mailboxes
to
Open Additional Mailbox. I have done this so that my users in the CSR
department can have their own emails open (nameATmydomain.com) as well
as
be
able to monitor salesATmydomain.com, informationATmydomain.com, etc.
The
problem is when they reply to a message in these additional mailboxes,
the
get an error:

Your message did not reach some or all of the intended recipients.

Subject: RE: gjh
Sent: 2/9/2007 9:26 AM

The following recipient(s) could not be reached:

A User on 2/9/2007 9:29 AM
You do not have permission to send to this recipient. For
assistance, contact your system administrator.
MSEXCH:MSExchangeIS:/DC=com/DC=mydomain:MYSERVER

How can I enable these users to send as this recipient? THe issue is
when
I
reply to the message in the additional mailbox, there is a FROM field
and
the
email (salesATmydomain.com) is in the from field. That is when this
error
occurs. I have given the users FULL MAILBOX ACCESS rights in AD.

Thanks for the help.

Where do I find that? I do not see the tab or how to go to Advanced View.
Thanks very much for your help.

Got it now. THanks for all your help!
 
R

Roady [MVP]

Open AD U&C and press View on the menu bar.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003


-----
Kevin said:
Roady said:
In AD U&C you can set the amount of details you see. If you open a user
object and don't see the Security tab you have it set to not show all
details.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003


-----
Kevin said:
:

You must enable the Send As security permission on the AD object as
well.
If
you don't see the tab enable the Advanced View.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003
http://www.howto-outlook.com/
Outlook FAQ, HowTo, Downloads, Add-Ins and more

-----

Not sure if this is outlook or exchange. I have added various
mailboxes
to
Open Additional Mailbox. I have done this so that my users in the
CSR
department can have their own emails open (nameATmydomain.com) as
well
as
be
able to monitor salesATmydomain.com, informationATmydomain.com, etc.
The
problem is when they reply to a message in these additional
mailboxes,
the
get an error:

Your message did not reach some or all of the intended recipients.

Subject: RE: gjh
Sent: 2/9/2007 9:26 AM

The following recipient(s) could not be reached:

A User on 2/9/2007 9:29 AM
You do not have permission to send to this recipient. For
assistance, contact your system administrator.
MSEXCH:MSExchangeIS:/DC=com/DC=mydomain:MYSERVER

How can I enable these users to send as this recipient? THe issue is
when
I
reply to the message in the additional mailbox, there is a FROM
field
and
the
email (salesATmydomain.com) is in the from field. That is when this
error
occurs. I have given the users FULL MAILBOX ACCESS rights in AD.

Thanks for the help.




Where do I find that? I do not see the tab or how to go to Advanced
View.
Thanks very much for your help.

Where do I find this? It is not showing up and I cannot seem to find how
to
make it show up.

THanks.
 
R

Roady [MVP]

You're welcome! :)

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003


-----
Kevin said:
Roady said:
In AD U&C you can set the amount of details you see. If you open a user
object and don't see the Security tab you have it set to not show all
details.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003


-----
Kevin said:
:

You must enable the Send As security permission on the AD object as
well.
If
you don't see the tab enable the Advanced View.

--
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003
http://www.howto-outlook.com/
Outlook FAQ, HowTo, Downloads, Add-Ins and more

-----

Not sure if this is outlook or exchange. I have added various
mailboxes
to
Open Additional Mailbox. I have done this so that my users in the
CSR
department can have their own emails open (nameATmydomain.com) as
well
as
be
able to monitor salesATmydomain.com, informationATmydomain.com, etc.
The
problem is when they reply to a message in these additional
mailboxes,
the
get an error:

Your message did not reach some or all of the intended recipients.

Subject: RE: gjh
Sent: 2/9/2007 9:26 AM

The following recipient(s) could not be reached:

A User on 2/9/2007 9:29 AM
You do not have permission to send to this recipient. For
assistance, contact your system administrator.
MSEXCH:MSExchangeIS:/DC=com/DC=mydomain:MYSERVER

How can I enable these users to send as this recipient? THe issue is
when
I
reply to the message in the additional mailbox, there is a FROM
field
and
the
email (salesATmydomain.com) is in the from field. That is when this
error
occurs. I have given the users FULL MAILBOX ACCESS rights in AD.

Thanks for the help.




Where do I find that? I do not see the tab or how to go to Advanced
View.
Thanks very much for your help.

Got it now. THanks for all your help!
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top